User Manual

C : carburettor

D : washer

E : bolt

“OIL” : OIL

B : Spark plug hole

11.1.6 Engine Oil

1. Change the engine oil.

2. Remove the spark plug

3. Pour a tablespoon (5 - 10 cc) of clean engine oil into the cylinder.

4. Pull the recoil starter several times to distribute the oil.

5. Reinstall the spark plug.

11.1.7 Clean fuel strainer

A : Fuel strainer

11.1.8 Storage precautions

If your engine will be stored with gasoline in the fuel tank and carburettor, it is important to

reduce the hazard of gasoline vapour ignition. Select a well-ventilated storage area away from

any appliance that operates with a flame, such as a furnace, water heater, or clothes dryer. Also

avoid any area with a spark producing electric motor, or where power tools are operated.

If possible, avoid storage areas with high humidity, because that promotes rust and corrosion.

If there is gasoline in the fuel tank, leave the fuel valve in OFF position.