Operation Manual

ManualsBrandsPowerplus ManualsOtherPOW7490

POW7490 EN

1 APPLICATION .................................................................................. 3

2 DESCRIPTION (FIG. A) ................................................................... 3

3 PACKAGE CONTENT LIST ............................................................. 3

4 SYMBOLS ........................................................................................ 3

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4

5.1 Working area ........................................................................................................... 4

5.2 Electrical safety ....................................................................................................... 4

5.3 Personal safety ....................................................................................................... 4

5.4 Power tool use and care ......................................................................................... 5

5.5 Service ..................................................................................................................... 5

6 ADDITIONAL SAFETY INSTRUCTIONS FOR TILE CUTTERS ..... 5

6.1 Power supply ........................................................................................................... 5

6.2 Diamond blades ...................................................................................................... 6

7 ASSEMBLY ...................................................................................... 6

7.1 Mounting the riving knife (fig. 1) ............................................................................ 6

7.2 Mounting the cutting disc (fig. 2 & 3) ..................................................................... 6

7.3 Mounting the upper blade guard (10) (fig. 4) ......................................................... 6

7.4 Mounting the adjustable fence ............................................................................... 6

8 OPERATION ..................................................................................... 6

8.1 Switching on and off ............................................................................................... 7

8.2 Angle adjustment of the table ................................................................................ 7

8.3 Water reservoir ........................................................................................................ 7

8.4 Performing straight and angle cuts ....................................................................... 7

8.4.1 Straight cuts .............................................................................................................. 7

8.4.2 Angle cuts at 45° ....................................................................................................... 7

8.5 Replacing the diamond cutting blade. ................................................................... 7

9 CLEANING AND MAINTENANCE ................................................... 7

9.1 Cleaning................................................................................................................... 7

9.2 Maintenance ............................................................................................................ 7

10 TECHNICAL DATA .......................................................................... 8

Summary of content (10 pages)

PAGE 1
POW7490 EN 1 APPLICATION .................................................................................. 3 2 DESCRIPTION (FIG. A) ................................................................... 3 3 PACKAGE CONTENT LIST ............................................................. 3 4 SYMBOLS ........................................................................................ 3 5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4 5.1 Working area .........................
PAGE 2
11 POW7490 EN NOISE ............................................................................................... 8 12 SERVICE DEPARTMENT ................................................................ 8 13 STORAGE ........................................................................................ 8 14 WARRANTY ..................................................................................... 9 15 ENVIRONMENT ...............................................................................
PAGE 3
EN POW7490 TILE CUTTER 600W - 180MM POW7490 1 APPLICATION Your tile cutter has been designed for cutting ceramic and clay paving and wall tiles. It is not designed for commercial use. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions. 2 DESCRIPTION (FIG. A) 1. 2. 3. 4. 5. Table Diamond cutting blade Parallel guide Water reservoir Adjustment of table angle 6. 7. 8.
PAGE 4
POW7490 5 GENERAL POWER TOOL SAFETY WARNINGS EN Read all safety warnings and instructions. Failure to heed warnings and follow instructions may result in electric shock, fire and/or serious injury. Keep safety warnings and instructions for future reference. The term "power tool" in the safety warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool. 5.1 Working area  Keep working area clean and well lit. Untidy and dark areas can lead to accidents..
PAGE 5
EN POW7490 5.4 Power tool use and care  Do not expect the power tool to do more than it can. Use the correct power tool for what you want to do. A power tool will achieve better results and be safer if used in the context for which it was designed.  Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken switch is dangerous and must be repaired.  Disconnect the plug from the power source before making adjustments, changing accessories, or storing power tools.
PAGE 6
EN POW7490  Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the tool is properly grounded. 6.2 Diamond blades  Only use 180mm diameter Continuous Rim Wet Diamond blades.  DO NOT use larger, segmented or 'turbo' blades, wood sawing blades, or any other cutting device. Severe bodily injury, and damage to your saw can occur.  Inspect blades daily for cracks or uneven wear.
PAGE 7
EN POW7490 8.1 Switching on and off To turn the machine ON, press the green push button. To turn the machine OFF, press the red push button. 8.2 Angle adjustment of the table  Allows to cut a tile at 45°.  Loosen the table locking screws on the front and back of the table.  Incline the table to the desired angle and re-tighten. 8.3 Water reservoir  When cutting with this tool, the disc should always be in contact with water.  When storing, remove the reservoir and clean it from sediments of cutting.
PAGE 8
EN POW7490 10 TECHNICAL DATA Rated Voltage AC (Un) Rated Frequency (fn) Rated Power (Pn) Rotation Speed (n) Blade Size Disc Diameter Max. Cutting depth Cable Length Maximum Cutting Capacity 90° - 0° Maximum Cutting Capacity 45° - 0° table size 230V~ 50Hz 600W 2950min-1 180x22.2x2.2mm 180mm 35mm 2m 33.5mm 21mm 330mm x 360mm 11 NOISE Noise values measured according to relevant standard.
PAGE 9
POW7490 EN 14 WARRANTY               This product is warranted as provided by law for a 24 -month period effective from the date of purchase by the first user. This warranty covers all material or production flaws excluding: batteries, chargers, defective parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc.
PAGE 10
EN POW7490 16 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, product: TILE CUTTER 600W - 180mm trade mark: POWERplus model: POW7490 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.