Operation Manual

POW751 EN
Copyright © 2016 VARO P a g e | 9 www.varo.com
8 MAINTENANCE
Make sure that the machine is not live when carrying out maintenance work
on the motor.
Our machines have been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper machine care and
regular cleaning.
8.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine. Regularly
clean the machine housing with soft cloth, preferably after each use. Keep the ventilation slots
free from dust and dirt. If the dirt does not come off use a soft cloth moistened with soapy
water. Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts
8.2 Lubrication
The machine requires no additional lubrication.
9 TECHNICAL SPECIFICATIONS
Voltage
230V
Frequency
50Hz
Power input
100W
Maximum nozzle flow rate
280 ml/min
Container capacity
900 ml
Nozzle diameter
0.6 mm / 0.8 mm / 1 mm
10 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
72 dB(A)
Acoustic power level LwA
85 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
7.6m/s²
K = 1.5 m/s²