Operation Manual

POW8136 EN
Copyright © 2014 VARO P a g e | 1 www.varo.com
1 APPLIANCE ..................................................................................... 3
2 DESCRIPTION ................................................................................. 3
3 PACKAGE CONTENT LIST ............................................................. 3
4 SYMBOLS ........................................................................................ 4
5 CORRECT USE OF YOUR POW8136............................................. 4
6 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4
6.1 Work area ................................................................................................................ 5
6.2 Electrical safety ....................................................................................................... 5
6.3 Personal safety ....................................................................................................... 5
6.4 Power tool use and care ......................................................................................... 5
6.5 Service ..................................................................................................................... 6
7 ADDITIONAL SAFETY INSTRUCTIONS FOR LASERS ................ 6
8 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES .......... 6
9 ASSEMBLY ...................................................................................... 6
9.1 Before putting the machine into operation ............................................................ 6
9.2 Setting up the saw unit (Fig. 1/2) ............................................................................ 7
10 OPERATION ..................................................................................... 7
10.1 Making 90° crosscuts with turntable at 0° (Fig. 1/3) .............................................. 7
10.2 Precision adjustment of the stop for crosscut 90° (Fig. 4/5) ................................ 7
10.3 Making 90° crosscuts with turntable at 0° - 45° (Fig. 6) ........................................ 7
10.4 Mitre cuts 0°-45° and rotary table 0° (Fig. 4/7) ....................................................... 8
10.5 Precision adjustment of the stop for 45° mitre cuts (Fig. 2/4/8) ........................... 8
10.6 Mitre cuts 0-45 and rotary table 0°-45° (Fig. 4/9) ................................................... 8
10.7 Locking lever (13).................................................................................................... 8
11 CHIP EXTRACTION (FIG. 1) ........................................................... 8
12 REPLACING THE SAW BLADE (FIG. 11) ...................................... 8
13 LASER FUNCTION (FIG. 12) ........................................................... 9
14 CLEANING AND MAINTENANCE ................................................... 9
14.1 Maintenance ............................................................................................................ 9
15 SERVICE DEPARTMENT ................................................................ 9