Operation Manual

ManualsBrandsPowerplus ManualsOtherPOWAIR0013

  POWAIR0013  EN 
Copyright © 2018 VARO  P a g e  | 1  www.varo.com 
APPLIANCE ....................................................................................................2 
DESCRIPTION (FIG. A) ...................................................................................2 
PACKAGE CONTENT LIST ............................................................................2 
SAFETY RULES ..............................................................................................2 
SYMBOLS .......................................................................................................3 
LUBRICATION ................................................................................................3 
IMPORTANT!!! ................................................................................................3 
CONNECTION AND USE ................................................................................3 
1  Installation of the sanding disc (Fig. 2) ........................................................3 
2  Speed adjustment (Fig. 3) ..............................................................................4 
TECHNICAL DATA .........................................................................................4 
SOUND EMISSION ..........................................................................................4 
TROUBLE SHOOTING ....................................................................................4 
ENVIRONMENT ...............................................................................................5 
DECLARATION OF CONFORMITY ................................................................6 
 

Summary of content (6 pages)

PAGE 1
POWAIR0013 EN 1 APPLIANCE ....................................................................................................2 2 DESCRIPTION (FIG. A) ...................................................................................2 3 PACKAGE CONTENT LIST ............................................................................2 4 SAFETY RULES ..............................................................................................2 5 SYMBOLS ...........................................
PAGE 2
POWAIR0013 EN PNEUMATIC ORBIT SANDER POWAIR0013 1 APPLIANCE Ideal for making fine finishes on wood, metal fiberglass and other compound materials. Warning! Read this manual and general safety instructions carefully before using the appliance, for your own safety. 2 1. 2. 3. 4. 3 ▪ ▪ ▪ ▪ ▪ DESCRIPTION (FIG. A) Sanding pad Trigger Handle Coupler PACKAGE CONTENT LIST Remove all packaging materials. Remove remaining packaging and packing inserts (if included). Check that the package contents are complete.
PAGE 3
POWAIR0013 5 EN SYMBOLS Read the manual carefully before use. Denotes risk of personal injury or damage to the tool. Wear eye protection. Wear noise protection. Wear a mask in dusty conditions. Wear protective gloves. 6 LUBRICATION An automatic in-line filter-regulator-lubricator is recommended (Fig. 1) as it increases tool life and keeps the tool in sustained operation. The in-line lubricator should be regularly checked and filled with air tool oil.
PAGE 4
POWAIR0013 2. EN Block/Secure the sanding disc. 8.2 Speed adjustment (Fig. 3) The rotation speed adjustment can be made by opening / closing the tap near the air inlet. 9 TECHNICAL DATA Model POWAIR0013 No load speed Max. 10 500 min-1 Operating pressure 6,3 bar Diam. connection air inlet ¼” Average air consumption 240 l/min Weight 1,4 kg Diam. sanding disc 150 mm 10 SOUND EMISSION Noise emission values measured according to relevant standard.
PAGE 5
PROBLEMS but loses under load POWAIR0013 POSSIBLE CAUSES REMEDIES Cam clutch worn or sticking due to lack of lubricant. EN can cause drag on high speed clutch parts, i.e. a typical oiled/lubricated wrench requires 1⁄2 ounce of oil. GREASE LUBRICATED:NOTE: Heat usually indicates insufficient grease in chamber. Severe operating conditions may require more frequent lubrication. Tool runs slowly.
PAGE 6
13 POWAIR0013 DECLARATION OF CONFORMITY EN VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, product: Pneumatic orbit sander trade mark: POWERplus model: POWAIR0013 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.