User Manual

ManualsBrandsPowerplus ManualsPower ToolsPOWAIR0021 PNEUMATIC TOOL SET 25PCS EN

POWAIR0802 EN

1 APPLIANCE ....................................................................................................2

2 DESCRIPTION (FIG. A) ...................................................................................2

3 PACKAGE CONTENT LIST ............................................................................2

4 SAFETY WARNINGS AND PRECAUTIONS ..................................................2

5 AIR SUPPLY ....................................................................................................4

6 LUBRICATION ................................................................................................4

7 IMPORTANT!!! ................................................................................................4

8 LOADING AND OPERATION ..........................................................................5

8.1 Drill Bit Installation ........................................................................................5

8.2 Using the Air Drill ...........................................................................................5

9 MAINTENANCE ...............................................................................................6

10 TECHNICAL DATA .........................................................................................6

11 NOISE ..............................................................................................................6

12 TROUBLE SHOOTING ....................................................................................7

13 ENVIRONMENT ...............................................................................................8

14 DECLARATION OF CONFORMITY ................................................................9

Summary of content (9 pages)

PAGE 1
POWAIR0802 EN 1 APPLIANCE ....................................................................................................2 2 DESCRIPTION (FIG. A) ...................................................................................2 3 PACKAGE CONTENT LIST ............................................................................2 4 SAFETY WARNINGS AND PRECAUTIONS ..................................................2 5 AIR SUPPLY .................................................................
PAGE 2
POWAIR0802 EN PNEUMATIC DRILL SET POWAIR0802 1 APPLIANCE The Air drill is a compressed air powered, rotary power tool whose out put spindle is typically fitted with a chuck to hold and drive an accessory such as a drill bit or screwdriver bit . Warning Read this manual and general safety instructions carefully before using the appliance, for your own safety. 2 1. 2. 3. 4. 3      DESCRIPTION (FIG. A) Trigger Coupler Chuck Reverse knob PACKAGE CONTENT LIST Remove all packaging materials.
PAGE 3
                 POWAIR0802 EN Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, extension cords, or air hoses. Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children. Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool.
PAGE 4
   POWAIR0802 EN Maintenance. For your safety, maintenance should be performed regularly by a qualified technician. Compressed air only. Never use combustible gas as a power source. Use both hands. The force generated from this tool can cause it to break free of your grasp, causing serious injury and damage. Always operate this tool with both hands. Note: Performance of the compressor (if powered by line voltage) may vary depending on variations in local line voltage.
PAGE 5
POWAIR0802 EN every two hours of use. This must be done directly along the male coupler or the screw (OIL) provided for the purpose on the side of the tool’s housing. Automatic lubrication is also possible using the supplied mini oiler that you have to install between the threaded connector of the tool and the male coupler. Make sure that the oiler is always filled with suitable oil. Fig. 1 1. Tool 7. Lubricator 2. Quick connector 8. Regulator (0-8.5 bar) 3. Quick coupler 9. Filter 4. Air hose 10.
PAGE 6
    9 POWAIR0802 EN If the drill bit does get caught while you are drilling, immediately release the trigger. Flip the reverse knob to the “R” position as shown in Fig B. This will reverse the rotation of the drill, allowing you to back out your drill bit. Lightly press the trigger until the drill bit spins free. Remove the air drill. Flip the reverse knob back to the “F” position. MAINTENANCE WARNING: Disconnect wrench from air supply before changing accessories, servicing or performing maintenance.
PAGE 7
POWAIR0802 EN 12 TROUBLE SHOOTING The following form lists the common operating system with problem and solutions. Please read the form carefully and follow it. WARNING: If any of the following symptoms appears during your operating, stop using the tool immediately, or serious personal injury could result. Only a qualified persons or an authorized service center can perform repairs or replacement of tool. Disconnect tool from air supply before attempting repair or adjustment.
PAGE 8
PROBLEMS POWAIR0802 POSSIBLE CAUSES REMEDIES EN Tools will not run. Air flows freely from exhaust One or more motor vanes stuck due to material build up. Pour air tool lubricating tool into air inlet. Operate tool in short bursts of forward and/or reverse rotation where applicable. Tap motor housing gently with plastic mallet. Disconnect supply. Free motor by rotating drive shank manually where applicable Tool will not shut off ‘O’ rings throttle valve dislodged from seat inlet valve.
PAGE 9
14 POWAIR0802 DECLARATION OF CONFORMITY EN VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, product: Pneumatic drill set trade mark: POWERplus model: POWAIR0802 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.