Operation Manual

POWC1071 EN
Copyright © 2019 VARO P a g e | 8 www.varo.com
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10 TECHNICAL DATA
Model
POWC1071
Rated Voltage
20V
Rotation speed
0-400/0-1400 min
-1
Torque positions
18+1
Max. drill capacity steel
10mm
Max. drill capacity wood
20 mm
Charger time
3/5 hours
Battery capacity
1300 mAh
Battery type
Li-ion
Max. torque
35Nm
Chuck type
Keyless chuck
11 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
88 dB(A)
Acoustic power level LwA
99 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
1.3 m/s²
K = 1,5 m/s²
12 SERVICE DEPARTMENT
▪ Damaged switches must be replaced by our after-sales service department.
▪ If the connecting cable (or mains plug) is damaged, it must be replaced by a special
connecting cable which is available from our service department. Replacement of the
connecting cable should only be carried out by our service department (see last page) or
by a qualified specialist (qualified electrician).
13 STORAGE
▪ Thoroughly clean the whole machine and its accessories.
▪ Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
▪ Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
▪ Don’t keep it in plastic bags to avoid humidity build-up.