Operation Manual

ManualsBrandsPowerplus ManualsToolsPOWC2010

POWC2010 EN

1 APPLICATION .................................................................................. 2

2 DESCRIPTION ................................................................................. 2

3 PACKAGE CONTENT LIST ............................................................. 2

4 SYMBOLS ........................................................................................ 2

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 3

5.1 Work area ................................................................................................................ 3

5.2 Electrical safety ....................................................................................................... 3

5.3 Personal safety ....................................................................................................... 3

5.4 Power tool use and care ......................................................................................... 4

5.5 Service ..................................................................................................................... 4

6 SPECIAL SAFETY INSTRUCTIONS FOR JIG SAWS .................... 4

7 OPERATING INSTRUCTIONS ........................................................ 5

7.1 Changing the saw blade (Fig 1) .............................................................................. 5

7.2 Switching ON/OFF (Fig 2) ....................................................................................... 5

7.3 Adjusting the base (fig 3) ....................................................................................... 5

7.4 Dust extraction ........................................................................................................ 5

8 TECHNICAL DATA .......................................................................... 5

9 NOISE ............................................................................................... 5

10 WARRANTY ..................................................................................... 5

11 ENVIRONMENT ............................................................................... 6

12 DECLARATION OF CONFORMITY ................................................ 7

Summary of content (7 pages)

PAGE 1
POWC2010 EN 1 APPLICATION .................................................................................. 2 2 DESCRIPTION ................................................................................. 2 3 PACKAGE CONTENT LIST ............................................................. 2 4 SYMBOLS ........................................................................................ 2 5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 3 5.1 Work area ......................
PAGE 2
EN POWC2010 JIG SAW 350W POWC2010 1 APPLICATION The power tool is intended for sawing wood, metal and plastics. It is not designed for commercial use. WARNING! Please read and understand this operating manual before use and keep it for your future reference. Your power tool should only be passed on together with these instructions. 2 DESCRIPTION 1. 2. 3. 4. 5. Power cable Locking button On/Off switch Inspection guard Saw blade 3      6. 7. 8. 9.
PAGE 3
5 POWC2010 GENERAL POWER TOOL SAFETY WARNINGS EN Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool. 5.1 Work area  Keep work area clean and well lit. Cluttered and dark areas invite accidents.
PAGE 4
EN POWC2010  If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust related hazards. 5.4 Power tool use and care  Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.  Do not use the power tool if the switch does not turn it on and off.
PAGE 5
EN POWC2010  Saw blades must be kept sharp and in good condition. Replace partially fractured and broken saw blades immediately. Work calmly and evenly with the jig saw. You will thus avoid accidents and the saw blades and the jig saw will last longer.  7 OPERATING INSTRUCTIONS 7.1 Changing the saw blade (Fig 1) Releasing the saw blade. Turn the screws anticlockwise (A) Insert the saw blade in the ram up to the stop and tighten the two screws of the retention clip.
PAGE 6
POWC2010              EN This warranty covers all material or production flaws excluding : batteries, chargers, defective parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects resulting from maltreatment, accidents or alterations; nor the cost of transportation. Damage and/or defects resulting from inappropriate use also do not fall under the warranty provisions.
PAGE 7
POWC2010 12 DECLARATION OF CONFORMITY EN VARO N.V. – Joseph Van Instraat 9 – BE2500 Lier – Belgium, declares that, product Jig saw trade mark PowerPlus model POWC2010 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.