Operation Manual

ManualsBrandsPowerplus ManualsToolPOWC4010

POWC4010 EN

1 APPLIANCE ..................................................................................... 2

2 DESCRIPTION ................................................................................. 2

3 PACKAGE CONTENT LIST ............................................................. 2

4 EXPLANATION OF SYMBOLS ....................................................... 2

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 3

5.1 Work area ................................................................................................................ 3

5.2 Electrical safety ....................................................................................................... 3

5.3 Personal safety ....................................................................................................... 3

5.4 Power tool use and care ......................................................................................... 4

5.5 Service ..................................................................................................................... 4

6 ADDITIONAL SAFETY-HINTS FOR SANDERS ............................. 4

7 OPERATION ..................................................................................... 5

7.1 Switching on/off ...................................................................................................... 5

7.2 Attaching the sandpaper ........................................................................................ 5

7.3 Collecting the dust .................................................................................................. 5

8 TECHNICAL DATA .......................................................................... 5

9 NOISE ............................................................................................... 5

10 CLEANING AND MAINTENANCE ................................................... 5

11 WARRANTTY ................................................................................... 6

12 ENVIRONMENT ............................................................................... 6

13 DECLARATION OF CONFORMITY ................................................ 7

Summary of content (7 pages)

PAGE 1
POWC4010 EN 1 APPLIANCE ..................................................................................... 2 2 DESCRIPTION ................................................................................. 2 3 PACKAGE CONTENT LIST ............................................................. 2 4 EXPLANATION OF SYMBOLS ....................................................... 2 5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 3 5.1 Work area .......................................
PAGE 2
EN POWC4010 FINISHING SANDER 135W POWC4010 1 APPLIANCE This orbital sander only operates when dry sanding on, and, with suitable grained abrasive sheets, is suitable for the following work. Surface sanding on wood, metal, and filler surfaces. Removal of layers of old paint, intermediate grinding, rust removal. Do not use machines, tools and accessories for additional applications (see manufacturer's instructions) for works other than those for which they are designed for.
PAGE 3
EN POWC4010 Mandatory use of eye protection. Wear a mask In dusty conditions Wear noise protection 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool. 5.
PAGE 4
EN POWC4010      Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times.
PAGE 5
EN POWC4010 7 OPERATION Do not sand plaster surfaces, (WARNING: In this case your guarantee becomes void) this may clog the motor (brushes, ball bearings, ..). 7.1 Switching on/off  To switch on the machine press the on/off switch.  To switch off the machine, release the on/off switch.  To switch the machine to continuous mode, you keep the on/off switch fully pressed and simultaneously press the loch button. And subsequently release the on/off switch.
PAGE 6
POWC4010   EN Keep the ventilation slots free from dust and dirt. If the dirt does not come off use a soft cloth moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts. 11 WARRANTTY               This product is warranted as provided by law for a 24 -month period effective from the date of purchase by the first user.
PAGE 7
EN POWC4010 13 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, Product: Finishing Sander Trade mark: PowerPlus Model: POWC4010 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.