Operation Manual

ManualsBrandsPowerplus ManualsSawPOWDP2510

POWDP2510 EN

1 APPLICATION ................................................................................ 3

2 DESCRIPTION (FIG A) ................................................................... 3

3 PACKAGE CONTENT LIST ............................................................ 3

4 SYMBOLS ....................................................................................... 3

5 GENERAL POWER TOOL SAFETY WARNINGS ......................... 4

5.1 Working area .......................................................................................................... 4

5.2 Electrical safety ..................................................................................................... 4

5.3 Personal safety ...................................................................................................... 4

5.4 Power tool use and care ........................................................................................ 5

5.5 Service .................................................................................................................... 5

6 ADDITIONAL SAFETY INSTRUCTIONS FOR RECIPROCATING

SAW ................................................................................................. 5

7 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND

CHARGERS .................................................................................... 6

7.1 Batteries ................................................................................................................. 6

7.2 Chargers ................................................................................................................. 6

8 CHARGING AND INSERTION OR REMOVAL OF BATTERY ...... 7

8.1 Charger indications (Fig. 1) ................................................................................... 7

8.2 Removal / insertion of battery (Fig. 2) .................................................................. 7

8.3 Battery capacity indicator (Fig. 3) ......................................................................... 7

9 ASSEMBLY ..................................................................................... 8

9.1 Install or remove the saw blade (Fig 4) ................................................................ 8

10 OPERATION.................................................................................... 8

10.1 Switch on/off (Fig. 5).............................................................................................. 8

10.2 To change angle of the pivot shoe assembly (Fig. 6) .......................................... 8

10.3 To change position of the pivot shoe assembly (Fig 7) ...................................... 8

10.4 LED work-light (Fig. 8) ........................................................................................... 9

11 GENERAL OPERATING INSTRUCTIONS ..................................... 9

11.1 General cutting ...................................................................................................... 9

11.2 Plunge cutting ........................................................................................................ 9

Summary of content (12 pages)

PAGE 1
POWDP2510 EN 1 APPLICATION ................................................................................ 3 2 DESCRIPTION (FIG A) ................................................................... 3 3 PACKAGE CONTENT LIST............................................................ 3 4 SYMBOLS ....................................................................................... 3 5 GENERAL POWER TOOL SAFETY WARNINGS ......................... 4 5.1 Working area ..............................
PAGE 2
POWDP2510 EN 11.3 Metal cutting ........................................................................................................ 10 12 CLEANING AND MAINTENANCE ............................................... 10 12.1 Cleaning ............................................................................................................... 10 13 TECHNICAL DETAILS .................................................................. 10 14 NOISE .....................................................
PAGE 3
EN POWDP2510 RECIPROCATING SAW 20V (NO ACCU) POWDP2510 1 APPLICATION The reciprocating saw is designed for cutting the wood, iron, nonferrous metals and plastics, using a standard saw blade. Not suitable for professional use. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions. 2 DESCRIPTION (FIG A) 1. 2. 3. 4. 5. 6. 7.
PAGE 4
EN POWDP2510 Wear noise protection Ambient temperature 40°C max. (only for battery) Wear eye protection Use battery and charger only in closed rooms Wear a mask In dusty conditions Do not expose charger and battery pack to water Wear gloves Do not incinerate battery pack or charger 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions. Failure to heed warnings and follow instructions may result in electric shock, fire and/or serious injury.
PAGE 5
EN POWDP2510       medication. A moment of inattention when operating a power tool may result in serious personal injury. Use safety equipment. Always wear eye protection. Using safety equipment such as a dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed will reduce the risk of personal injury. Avoid accidental starts. Ensure the switch is in the off position before inserting the plug.
PAGE 6
EN POWDP2510         Before switching on the tool, be sure the blade in not contacting the work piece. Keep hands away from moving parts and on the top surface of the work piece. Do not place hands below work surface while saw is operating. Hold tool by insulated grip surface when performing an operation where the cutting tool may contact the hidden wiring or its own cord. Contact the alive wire make exposed the metal parts of the tool alive and shock the operator.
PAGE 7
EN POWDP2510     Do not expose to water. Do not open the charger. Do not probe the charger. The charger is intended for indoor use only. 8 CHARGING AND INSERTION OR REMOVAL OF BATTERY 8.1 Charger indications (Fig.
PAGE 8
EN POWDP2510 9 ASSEMBLY 9.1 Install or remove the saw blade (Fig 4) WARNING: Before making any adjustments ensure the saw is switched off with the lock-off button in the centre position and remove the battery from the saw. To avoid accidental start, check to make sure lock-off button is not engaged prior to plugging in tool and you finger is not touching the on/off switch trigger.    Rotate the Quick-release blade clamp (2) anticlockwise with hand.
PAGE 9
EN POWDP2510 10.4 LED work-light (Fig. 8) The LED work light (3) can light prior to motor running if you press the switch lightly, which keep the work area to be lighted for checking clearly at first, and it lights also during your operation. NOTE: The LED work-light delay about 5s to extinguish after turn off the tool. WARNING: Do not stare directly at the light beam. Never aim the beam at any person or an object other than the work piece.
PAGE 10
EN POWDP2510 saw forward to lower the blade onto the cut line. Continue this motion until the saw blade is perpendicular to the work piece. 11.3 Metal cutting Blades specifically designated for cutting metals must be used for this purpose. You may use light oil as a coolant when cutting metal, this will prevent overheating of the blade, help the blade cut faster, and promote longer blade life. 12 CLEANING AND MAINTENANCE 12.
PAGE 11
POWDP2510              EN plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects resulting from maltreatment, accidents or alterations; nor the cost of transportation. Damage and/or defects resulting from inappropriate use also do not fall under the warranty provisions. We also disclaim all liability for any bodily injury resulting from inappropriate use of the tool. Repairs may only be carried out by an authorised customer service centre for Powerplus tools.
PAGE 12
EN POWDP2510 17 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, Product: Reciprocating saw Trade mark: POWERplus Model: POWDP2510 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.