Operation Manual

POWE10030 EN
Copyright © 2018 VARO P a g e | 7 www.varo.com
9 TECHNICAL DATA
Rated voltage
230-240V
Rated frequency
50Hz
Rated power
720W
Rotation speed
0-3000min
-1
Max drill-bit diameter
13mm
Cable length
2m
Max torque
3Nm
Capacity concrete
13mm
Capacity steel
8mm
Capacity wood
25mm
Material housing
Nylon
Chuck type
13mm Sanou keyless chuck + lock
Impact rate
48000strks/min
Carbon brush motor
yes
Soft grip
Yes
Left/right
Yes
10 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
87 dB(A)
Acoustic power level LwA
98 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
8,3m/s²
K = 1,5 m/s²
11 WARRANTY
▪ This product is warranted for a 24-month period effective from the date of purchase by the
first user.
▪ This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
▪ Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
▪ We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
▪ Repairs may only be carried out by an authorized customer service center for Powerplus
tools.
▪ You can always obtain more information at the number 00 32 3 292 92 90.
▪ Any transportation costs shall always be borne by the customer, unless agreed otherwise
in writing.
▪ At the same time, no claim can be made on the warranty if the damage of the device is the
result of negligent maintenance or overload.