Operation Manual

POWE40020 EN
Copyright © 2017 VARO P a g e | 6 www.varo.com
7.4.1 To install:
Insert the dust bag (5) into dust extraction port, rotate the dust bag anti-clockwise by hand
and lock on the correct position, make sure the dust bag is tightly fastened.
7.4.2 To remove:
When removing the dust bag, follow the above procedure in reverse order.
8 TECHNICAL DATA
Rated Voltage
230V
Rated Frequency
50Hz
Rated Power
140W
Rotation speed
13000min
-1
Cable length
2m
Sanding surface
140x140x80mm
Carbon brush motor
Yes
Oscillation speed
26000min
-1
Soft grip
Yes
Hook&loop system
Yes
Self dust function
Yes
Power on LED light
Yes
9 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
75dB(A)
Acoustic power level LwA
86dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration):
4.7m/s²
K = 1.5 m/s²
10 CLEANING AND MAINTENANCE
 The machine does not require any special maintenance.
 For safe and efficient working, always keep the machine and the ventilation slots clean.
 Always be sure that the tool is switched off and unplugged before carrying out any work on
the tool.
11 SERVICE DEPARTMENT
 Damaged switches must be replaced by our after-sales service department.
 If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).