Operation Manual

ManualsBrandsPowerplus ManualsSawPOWE50102

  POWE50102  EN 
Copyright © 2018 VARO  P a g e  | 1  www.varo.com 
APPLICATION .................................................................................. 3 
DESCRIPTION (FIG. A, B & C) ....................................................... 3 
PACKAGE CONTENT LIST ............................................................. 3 
SYMBOLS ........................................................................................ 4 
GENERAL POWER TOOL SAFETY WARNINGS .......................... 4 
1  Working area ........................................................................................................... 4 
2  Electrical safety ....................................................................................................... 4 
3  Personal safety ....................................................................................................... 4 
4  Power tools use and care ....................................................................................... 5 
5  Service ..................................................................................................................... 5 
ADDITIONAL SAFETY INSTRUCTIONS ........................................ 5 
ADDITIONAL SAFETY INSTRUCTIONS FOR LASERS ................ 7 
ASSEMBLY ...................................................................................... 7 
1  Assembling the extension hoops .......................................................................... 7 
2  Assembling the clamp ............................................................................................ 7 
OPERATING INSTRUCTIONS ........................................................ 7 
1  Transporting the mitre saw .................................................................................... 7 
2  Dust and chip extraction ........................................................................................ 7 
3  Clamping the work piece ........................................................................................ 8 
4  Horizontal mitre angle............................................................................................. 8 
5  Adjusting of the cutting angle ................................................................................ 8 
6  Vertical bevel angle (Fig. 1) .................................................................................... 8 
7  Slide lock adjustment ............................................................................................. 8 
8  Switching ON / OFF ................................................................................................. 8 
9  Laser (25) ................................................................................................................. 8 
10  Dust bag .................................................................................................................. 8 
11  Sawing ..................................................................................................................... 9 
12  Sawing special work pieces ................................................................................... 9 
13  Replacing the saw blade (Fig. 2) ............................................................................ 9 
CLEANING AND MAINTENANCE ................................................... 9 
1  Cleaning................................................................................................................... 9 

Summary of content (12 pages)

PAGE 1
POWE50102 EN 1 APPLICATION .................................................................................. 3 2 DESCRIPTION (FIG. A, B & C) ....................................................... 3 3 PACKAGE CONTENT LIST ............................................................. 3 4 SYMBOLS ........................................................................................ 4 5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4 5.1 Working area ............................
PAGE 2
POWE50102 EN 10.2 Connecting cable .................................................................................................. 10 11 TECHNICAL DATA ........................................................................ 10 12 CUTTING CAPACITY..................................................................... 10 13 NOISE ............................................................................................. 10 14 STORAGE .............................................................
PAGE 3
EN POWE50102 MINI TELESCOPIC MITRE SAW 1650W POWE50102 1 APPLICATION This power tool is intended as a stationary machine for making straight and cross cuts in wood. You can saw hard and soft wood as well as chip and fibre boards. Only adults may use this tool. WARNING! For your own safety, read this manual and the general safety instructions carefully before using the appliance. Your power tool should only be given to other users together with these instructions. 2 DESCRIPTION (FIG. A, B & C) 1. 2. 3. 4.
PAGE 4
POWE50102 EN 4 SYMBOLS The following symbols are used in this manual and/or on the machine: Denotes risk of personal injury or damage to the tool. Wear ear guards and goggles Read manual before use. In accordance with essential requirements of the European directive(s) Wear gloves. Class II - The machine is double insulated; Earthing wire is therefore not necessary. 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions.
PAGE 5
POWE50102 ▪ ▪ ▪ ▪ ▪ ▪ EN Use safety equipment. Always wear eye protection. Using safety equipment such as a dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed will reduce the risk of personal injury. Avoid accidental starts. Ensure the switch is in the off position before inserting the plug. Carrying power tools with your finger on the switch or plugging in power tools when the switch is in the on position makes accidents more likely.
PAGE 6
POWE50102 ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ EN Only use correctly sharpened saw blades. Never exceed the maximum speed that is indicated on the saw blade. Before installing the saw blade, clean the axle, the flanges (especially the assembly surfaces) and the hexagonal nut. Incorrect mounting can lead to vibrations/knocking or slipping of the saw blade. Prevent that the saw comes into contact with metals, such as nails and screws.
PAGE 7
POWE50102 ▪ ▪ ▪ ▪ EN The hazard to your health from such exposures is dependent on how frequently you do this kind of work. Measures for reducing your exposure to such chemicals: Always work in well-ventilated surroundings and with certified safety equipment, such as dust masks that have been specially designed for filtering out microscopic particles. For sawing operations, connect the equipment to a dust exhaust system.
PAGE 8
EN POWE50102 9.3 Clamping the work piece Make sure the work piece can’t be catapulted. The clamp (5) is the most perfect gadget to avoid this. ▪ Press the work piece against the fence (6) and between the clamp ▪ Tighten the clamp (5) clockwise to secure the work piece. 9.4 Horizontal mitre angle ▪ Loosen the lock knob for mitre angle (14) and turn the saw table tip to left or right until the pointer point at the desired angle on the angle gauge for mitre angle (7), tighten the lock knob (14). 9.
PAGE 9
EN POWE50102 9.11 ▪ ▪ ▪ ▪ ▪ ▪ ▪ Sawing Make sure the saw blade doesn’t block while you are sawing. It causes damage to and burning of the motor. If there is a blockade of the saw blade, please loosen the switch immediately to prevent damage at the motor. Clamp the work piece firmly. Set the required horizontal mitre angle or the required vertical bevel angle. Switch on the power tool. Move the handle (3) slowly downwards. You have to push the safety switch (2) before you can do this.
PAGE 10
EN POWE50102 10.2 Connecting cable If the connecting cable (or mains plug) is damaged, it must be replaced. Replacement of the connecting cable should only be carried out by a qualified specialist (qualified electrician).
PAGE 11
POWE50102 EN 16 WARRANTY ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ This product is warranted as provided by law for a 24 -month period effective from the date of purchase by the first user. This warranty covers all material or production flaws excluding: batteries, chargers, defective parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc.
PAGE 12
EN POWE50102 18 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, product: Mini Mitre saw trade mark: POWERplus model: POWE50102 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.