Operation Manual

ManualsBrandsPowerplus ManualsOtherPOWE80010

POWE80010 EN

1 APPLICATION ................................................................................... 2

2 DESCRIPTION (FIG. A) ..................................................................... 2

3 PACKAGE CONTENT LIST .............................................................. 2

4 SYMBOLS .......................................................................................... 3

5 GENERAL POWER TOOL SAFETY WARNINGS ............................ 3

5.1 Working area ............................................................................................................. 3

5.2 Electrical safety ......................................................................................................... 3

5.3 Personal safety ......................................................................................................... 3

5.4 Power tool use and care ........................................................................................... 4

5.5 Service ....................................................................................................................... 4

6 MACHINE-SPECIFIC SAFETY WARNINGS ..................................... 4

7 ASSEMBLY ........................................................................................ 5

7.1 Mounting sanding plate/ saw blade/ spatula (Fig. 1) ............................................... 5

7.2 Mounting/changing the sand paper (Fig. 2) ............................................................. 5

7.3 Fitting the auxiliary handle (Fig. 3)........................................................................... 6

8 OPERATION ...................................................................................... 6

8.1 Switching ON/OFF (Fig. 4) ........................................................................................ 6

8.2 Speed adjusting (Fig. 5) ............................................................................................ 6

8.3 Application tips ......................................................................................................... 6

8.3.1 Selecting the Application Tool/Accessory .................................................................... 6

8.3.2 Sawing ........................................................................................................................ 7

8.3.3 Sanding....................................................................................................................... 7

8.3.4 Scraping ...................................................................................................................... 7

9 CLEANING AND MAINTENANCE .................................................... 7

10 TECHNICAL DETAILS ...................................................................... 8

11 NOISE ................................................................................................. 8

12 WARRANTY ....................................................................................... 8

13 ENVIRONMENT ................................................................................. 9

14 DECLARATION OF CONFORMITY ................................................ 10

Summary of content (10 pages)

PAGE 1
POWE80010 EN 1 APPLICATION ................................................................................... 2 2 DESCRIPTION (FIG. A) ..................................................................... 2 3 PACKAGE CONTENT LIST .............................................................. 2 4 SYMBOLS .......................................................................................... 3 5 GENERAL POWER TOOL SAFETY WARNINGS ............................ 3 5.1 Working area ...............
PAGE 2
EN POWE80010 MULTI-USE TOOL 350W POWE80010 1 APPLICATION Depending on which accessory mounted this power tool is intended for dry sanding small areas and for sawing, scraping polishing, rasping, cutting and separating. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions. 2 DESCRIPTION (FIG. A) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
PAGE 3
POWE80010 EN 4 SYMBOLS In this manual and/or on the machine the following symbols are used: Denotes risk of personal injury or damage to the tool. Wear ear guards and goggles. Read manual before use. Wear gloves. In accordance with essential requirements of the European directive(s). "Class II - The machine is double insulated; Earthing wire is therefore not necessary. 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions.
PAGE 4
POWE80010      EN Avoid accidental starts. Ensure the switch is in the off position before inserting the plug. Carrying power tools with your finger on the switch or plugging in power tools when the switch is in the on position makes accidents more likely. Remove any adjusting keys or spanners before turning on the power tool. A spanner or key left attached to a rotating part of the power tool may result in personal injury. Do not reach out too far. Keep your feet firmly on the ground at all times.
PAGE 5
EN POWE80010      Wear protective gloves when changing application tools/accessories. Application tools/ accessories become hot after prolonged usage. Do not scrape wetted materials (e. g. wallpaper) or on moist surfaces. Penetration of water into the machine increases the risk of an electric shock. Do not treat the surface to be worked with solvent-containing fluids. Materials being warmed up by the scraping can cause toxic vapours to develop. Exercise extreme caution when handling the scraper.
PAGE 6
EN POWE80010 7.3 Fitting the auxiliary handle (Fig. 3) WARNING: Prior to assembly and adjustment always switch off the tool and pull out the power plug from the mains socket. The auxiliary handle (3) can be attached to the multi-purpose in two different mounting holes: left and right. 8 OPERATION 8.1 Switching ON/OFF (Fig. 4) First check that the cable and plug are not damaged.  Connect the plug to the power supply. The power-on indicator (5) is illumed until the tool disconnect from the power mains.
PAGE 7
EN POWE80010 Depends on sanding sheet. Base plate for sanding 8.3.2 Sawing Use undamaged faultless saw blades only. Deformed, blunt saw blades or saw blades that are otherwise damaged can break. Plunge cuts may only be applied to soft materials, such as wood, gypsum plaster boards, etc.! Before sawing with saw blades in wood, particle board, building materials, etc., check these for foreign objects such as nails, screws, or similar. If required, remove foreign objects or use saw blades for metal. 8.3.
PAGE 8
EN POWE80010  Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts. Make sure no water can reach the inside of the power tool! 10 TECHNICAL DETAILS Model nr.
PAGE 9
POWE80010       EN Definitely excluded from the warranty is damage resulting from fluid permeation, excessive dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not following the instructions given in the manual), inexpert assembly, lightning strike, erroneous net voltage. This list is not exhaustive.
PAGE 10
EN POWE80010 14 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, Product: Multi-use tool Trade mark: POWERplus Model: POWE80010 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.