Operation Manual

POWESET5 EN
Copyright © 2017 VARO P a g e | 6 www.varo.com
7.4.2 To remove:
When removing the dust bag, follow the above procedure in reverse order.
8 TECHNICAL DATA
Rated Voltage
230 V
Rated Frequency
50 Hz
Rated Power
140 W
Rotation speed
13000 min
-1
Cable length
2 m
Sanding surface
140x140x80 mm
Carbon brush motor
Yes
Oscillation speed
26000 min
-1
Soft grip
Yes
Hook&loop system
Yes
Self-dust function
Yes
Power on LED light
Yes
9 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
75 dB(A)
Acoustic power level LwA
86 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
4.7 m/s²
K = 1.5 m/s²
10 CLEANING AND MAINTENANCE
▪ The machine does not require any special maintenance.
▪ For safe and efficient working, always keep the machine and the ventilation slots clean.
▪ Always be sure that the tool is switched off and unplugged before carrying out any work on
the tool.
11 SERVICE DEPARTMENT
▪ Damaged switches must be replaced by our after-sales service department.
▪ If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).
12 STORAGE
▪ Thoroughly clean the whole machine and its accessories.
▪ Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
▪ Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
▪ Don’t keep it in plastic bags to avoid humidity build-up.