Operation Manual

POWLI20301 EN
Copyright © 2016 VARO P a g e | 2 www.varo.com
4.2 LUX adjustment
The LUX adjustment determines at what light level the
lighting system will start operating.
You can adjust LUX from 10lux to 1000lux.
4.3 SENS. adjustment
The sensitivity adjustment may be adjusted to compensate for
seasonal variations in temperature and to reduce unwanted
triggering. Detecting distance can be adjusted from 1m to 6m.
5 TECHNICAL DATA
Type
POWLI20301
Power
30W
Voltage/frequency
220–240V ~ 50Hz
Floodlight facade material
tempered glass
Waterproof protection grade
IP65
life-span
>30.000 hours
Lumen
2250
Color temperature
6500K
Beam angle
100°
Detection angle
90°
Net weight
1,4kg
Dimensions
26x6x25,5cm
6 POSSIBLE PROBLEMS
 Ventilators, such as the discharge from a vapor cap or dryer (hot air movement) can
cause the lamp to switch on when it is not required to do so.
 Passing cars (warm engines) can also cause your lamp to switch on.
 Nearby trees and bushes, sudden changes in temperature and gusts of wind can
also cause the lamp to switch on.
 If the lamp has been placed under a roof or under trees, then the lamp can also burn
during daylight hours.
 If your lamp does not work then the bulb or fuse could be defective or there may have
been a failure in the electrical circuit.
 If the temperature difference between the object to be detected and surrounding area
is too small (in the summer for example), then your lamp will react later. The range of
detection is then 5 meters instead of 7 meters for example.