Operation Manual

POWLI630 EN

LED TOUCH ON LIGHTS WITH REMOTE

POWLI630

1 DOMAIN OF USE

These battery operated round shaped touch lights are ideal for in closets, kitchens,

stairways, boats, kid’s rooms, pantries, garages, storage units, etc…, is a complete

solution to brighten dark areas

2 PACKAGE CONTENT LIST

 Remove all packaging materials.

 Remove remaining packing and package inserts (if included).

 Check that the package contents are complete.

 Check the appliance, the power cord, the power plug and all accessories for

transportation damage.

 Keep the packing materials as far as possible till the end of the warranty period.

Dispose it into your local waste disposal system afterwards.

WARNING: Packaging materials are not toys! Children must not play

with plastic bags! Danger of suffocation!

6x LED touch on light

1x Remote control

1x Remote control holder

18x ‘AA’ size Duracell battery

2x ‘AAA’ size Duracell battery

7x Wall adhesive

1 x Manual

If any parts are missing or damaged, please contact your dealer.

3 SYMBOLS

In this manual and/or on the machine the following symbols are used:

Read the manual before using the machine

In accordance with essential applicable safety standards of European

directives

4 WARNING

 The remote must be within 6m of the lights, without obstruction. The range will be

reduced if there are walls or metal barriers between the lights ad remote.

PAGE 1
POWLI630 EN LED TOUCH ON LIGHTS WITH REMOTE POWLI630 1 DOMAIN OF USE These battery operated round shaped touch lights are ideal for in closets, kitchens, stairways, boats, kid’s rooms, pantries, garages, storage units, etc…, is a complete solution to brighten dark areas 2 PACKAGE CONTENT LIST     Remove all packaging materials. Remove remaining packing and package inserts (if included). Check that the package contents are complete.
PAGE 2
POWLI630 5 EN BATTERY INSTALLATION (FIG 1) 5.1 Puck light  Each puck light need to be assembled wit 3xAA(1,5V) batteries) 5.2 Remote switch.  The remote switch need to be assembled with 2 x AAA (1,5V) batteries. If you remove the adhesive tape, youmag damage the surface. To increase battery life, the puck light turns off after 30 minutes. 6 OPERATION 6.1 Puck light operation (Fig.