Operation Manual

POWP6010 EN
Copyright © 2018 VARO NV P a g e | 1 www.varo.com
1 APPLICATION ................................................................................... 3
2 DESCRIPTION (FIG A) ...................................................................... 3
3 PACKAGE CONTENT LIST .............................................................. 3
4 SYMBOLS .......................................................................................... 4
5 GENERAL POWER TOOL SAFETY WARNINGS ............................ 4
5.1 Work area .................................................................................................................. 4
5.2 Electrical safety ......................................................................................................... 4
5.3 Personal safety ......................................................................................................... 5
5.4 Power tool use and care ........................................................................................... 5
5.5 Service ....................................................................................................................... 5
6 ADDITIONAL SAFETY WARNINGS FOR PLANERS ...................... 5
7 ADJUSTMENTS/SETTINGS.............................................................. 6
7.1 Replacing the cutters (Fig. 1) ................................................................................... 6
7.2 Setting the planing depth (Fig. 2) ............................................................................. 6
7.3 Dust extraction .......................................................................................................... 6
7.4 Changing Direction of Dust Extraction (Fig .3) ....................................................... 7
7.5 Replacing the drive belt: (Fig. 4) .............................................................................. 7
8 OPERATION ...................................................................................... 7
8.1 Switching on and off ................................................................................................. 7
8.2 Planing ....................................................................................................................... 7
8.3 Chamfering ................................................................................................................ 7
8.4 Using the “T” Guide .................................................................................................. 7
8.5 Rebating .................................................................................................................... 7
9 TROUBLE SHOOTING ...................................................................... 8
10 CLEANING AND MAINTENANCE .................................................... 8
10.1 Cleaning ..................................................................................................................... 8
10.2 Checking and replacing the carbon brushes .......................................................... 8
10.3 Connecting cable and mains plug ........................................................................... 8
11 TECHNICAL DATA ............................................................................ 9
12 NOISE ................................................................................................. 9