User Manual

ManualsBrandsPowerplus ManualsPower ToolsPOWX0055 DRILL/SCREWDRIVER 18V 2BATT EN

POWX0052 EN

1 APPLICATION ................................................................................ 3

2 DESCRIPTION (FIG. A) .................................................................. 3

3 PACKAGE CONTENT LIST ............................................................ 3

4 SAFETY INSTRUCTIONS ............................................................... 3

5 GENERAL SAFETY WARNINGS AND INSTRUCTIONS .............. 4

5.1 Work area ............................................................................................................... 4

5.2 Electrical safety ..................................................................................................... 4

5.3 Personal safety ...................................................................................................... 4

5.4 Power tool use and care ........................................................................................ 5

5.5 Service .................................................................................................................... 5

6 DRILL SAFETY WARNINGS: ......................................................... 5

7 SCREWDRIVER SAFETY WARNING: ........................................... 5

8 SPECIAL SAFETY INSTRUCTIONS FOR BATTERY PACK AND

CHARGER ....................................................................................... 5

9 INITIAL OPERATION ...................................................................... 6

9.1 Inserting/removing battery .................................................................................... 6

9.2 Charging ................................................................................................................. 7

9.2.1 Slow charging (3-5h) (refer to technical data for model) ............................................ 7

9.3 Inserting drill bits / screwdriver bits ..................................................................... 7

9.4 On/off switch .......................................................................................................... 8

9.5 Left/right switch ..................................................................................................... 8

9.6 Variable speed ....................................................................................................... 8

9.7 Low/high Speed selection: .................................................................................... 8

9.8 Torque setting ........................................................................................................ 8

10 TECHNICAL DATA ......................................................................... 8

11 NOISE .............................................................................................. 9

12 WARRANTY .................................................................................... 9

13 CLEANING AND MAINTENANCE ............................................... 10

13.1 Cleaning ............................................................................................................... 10

14 ENVIRONMENT ............................................................................ 10

Summary of content (11 pages)

PAGE 1
POWX0052 EN 1 APPLICATION ................................................................................ 3 2 DESCRIPTION (FIG. A) .................................................................. 3 3 PACKAGE CONTENT LIST............................................................ 3 4 SAFETY INSTRUCTIONS............................................................... 3 5 GENERAL SAFETY WARNINGS AND INSTRUCTIONS .............. 4 5.1 Work area ....................................................
PAGE 3
EN POWX0052 POWX0052 CORDLESS DRILL 14.4V 1 APPLICATION The power tool is intended for driving and drilling through wood and plastics It is not designed for commercial use. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions. 2 DESCRIPTION (FIG. A) Before using this tool, familiarize yourself with all operating features and safety requirements.
PAGE 4
POWX0052 EN 5 GENERAL SAFETY WARNINGS AND INSTRUCTIONS Warning! Read all safety warnings and instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool. 5.1 Work area  Keep work area clean and well lit.
PAGE 5
EN POWX0052 5.4 Power tool use and care  Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.  Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.  Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools.
PAGE 6
POWX0052                EN Before the use of the charger and the battery pack, read the instruction manual for it carefully. During the charge process, the current used should correspond to the current of the battery charger. Never let moisture, rain or splashed water reaches the charging location. The ambient temperature must not exceed 40oC. Never expose the device to direct insulation.
PAGE 7
EN POWX0052 1. Cordless drill 2. Battery pack 3. Release button 9.2 Charging 9.2.1      Slow charging (3-5h) (refer to technical data for model) Put the battery pack in the charger stand. Make sure it is placed correctly ( + and - ) Insert the connector plug into the charger Plug in the socket-outlet( 230V~ ) When the indicator light starts burning this means the battery pack is now being charged. Normally it will take 3-5 hours to fully charge the battery.
PAGE 8
EN POWX0052 9.4 On/off switch  To switch on the tool, press the on/off switch  To switch off the tool, release the on/off switch 9.5 Left/right switch / shown on the left/right switch Set the Left/right switch to Set the Left/right switch to Change the direction of rotation only when the machine is not in operation ! Caution Operating the machine with a low speed for a long time will increase the risk that the motor will be overheated.
PAGE 9
EN POWX0052 11 NOISE Noise emission values measured according to relevant standard. (K=3) Acoustic pressure level LpA 68 dB(A) Acoustic power level LwA 79 dB(A) ATTENTION! Wear over 85 dB(A). vibration Drill mode: Screwdriver mode: hearing protection 2.3 m/s² 1.5 m/s² when sound pressure is K=1.5m/s² K=1.5m/s² Warning The vibration emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used.
PAGE 10
EN POWX0052    We reserve the right to reject a claim whenever the purchase cannot be verified or when it is clear that the product has not been properly maintained. (Clean ventilation slots, carbon brushes serviced regularly, etc.). Your purchase receipt must be kept as proof of date of purchase. Your appliance must be returned undismantled to your dealer in an acceptably clean state, (in its original blow-moulded case if applicable to the unit), accompanied by proof of purchase.
PAGE 11
EN POWX0052 15 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, Product: Cordless Drill/ screwdriver trade mark: POWERplus model : POWX0052 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.