Operation Manual

ManualsBrandsPowerplus ManualsScrewdriverPOWX0057

POWX0057 EN

1 APPLICATION ................................................................................ 3

2 DESCRIPTION (FIG A) ................................................................... 3

3 PACKAGE CONTENT LIST ............................................................ 3

4 SYMBOLS ....................................................................................... 4

5 GENERAL POWER TOOL SAFETY WARNINGS ......................... 4

5.1 Working area .......................................................................................................... 4

5.2 Electrical safety ..................................................................................................... 4

5.3 Personal safety ...................................................................................................... 5

5.4 Power tool use and care ........................................................................................ 5

5.5 Battery tool use and care ...................................................................................... 5

5.6 Service .................................................................................................................... 6

6 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND

CHARGERS .................................................................................... 6

6.1 Batteries ................................................................................................................. 6

6.2 Charger ................................................................................................................... 6

7 OPERATION.................................................................................... 7

7.1 Charging the battery pack (fig 2) .......................................................................... 7

7.2 Installing and Removing a Bit and a Drill (fig 3) .................................................. 8

7.3 Removal / insertion of battery (Fig. 4) .................................................................. 8

7.4 Switch (Fig. 5 & Fig. 6) ........................................................................................... 9

7.4.1 Rotation (right/left/lock) ............................................................................................ 9

7.4.2 Variable speed ......................................................................................................... 9

7.5 Adjusting the torque .............................................................................................. 9

7.6 Speed selector (Fig. 7) ......................................................................................... 10

7.7 LED light ............................................................................................................... 10

7.8 Magnetic Drill/Bit Holder and Bit Holder ............................................................ 11

7.9 To recharge the battery pack .............................................................................. 11

7.10 Drilling .................................................................................................................. 11

7.10.1 Drilling in wood ...................................................................................................... 12

7.10.2 drilling in metal ....................................................................................................... 12

8 CLEANING AND MAINTENANCE ............................................... 12

Summary of content (14 pages)

PAGE 1
POWX0057 EN 1 APPLICATION ................................................................................ 3 2 DESCRIPTION (FIG A) ................................................................... 3 3 PACKAGE CONTENT LIST............................................................ 3 4 SYMBOLS ....................................................................................... 4 5 GENERAL POWER TOOL SAFETY WARNINGS ......................... 4 5.1 Working area ...............................
PAGE 2
9 POWX0057 EN TECHNICAL DETAILS .................................................................. 12 10 NOISE ............................................................................................ 12 11 WARRANTY .................................................................................. 13 12 ENVIRONMENT ............................................................................ 13 12.1 Battery pack .....................................................................................
PAGE 3
EN POWX0057 DRILL/SCREWDRIVER 18V 3 BATT POWX0057 1 APPLICATION Your rechargeable drill/screwdriver has been designed for drilling in wood, metal and plastics and for screw driving applications. It is not designed for commercial use. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions.
PAGE 4
EN POWX0057 4 SYMBOLS Denotes risk of personal injury or damage to the tool. In accordance with essential requirements of the European directive(s) Read manual before use "Class II - The machine is double insulated; Earthing wire is therefore not necessary (only for charger) Ambient temperature 40°C max.
PAGE 5
POWX0057 EN 5.3 Personal safety  Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or medication. A moment of inattention when operating a power tool may result in serious personal injury.  Use personal protective equipment. Always wear eye protection.
PAGE 6
EN POWX0057  If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. 5.6 Service  Your power tool should be serviced by a qualified specialist using only standard spare parts. This will ensure that it meets the required safety standards. 6 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND CHARGERS 6.1         Batteries Never attempt to open for any reason.
PAGE 7
EN POWX0057 7 OPERATION 7.1 Charging the battery pack (fig 2) Charger station adaptor Red light Battery pack Fig. 2 The battery pack has been shipped in a low charge condition to prevent possible problem. You should charge them prior to use. Note: Batteries will not reach full charge the first time they are charged. Allow several cycles (drilling followed by recharging) for the item to fully charge. The battery should only be used indoors. The battery as supplied is not fully charged.
PAGE 8
EN POWX0057 7.2 Installing and Removing a Bit and a Drill (fig 3) This drill has a keyless chuck (1) to prevent the bit or drill from loosening. 1 Hold ring A of the drill chuck tight with one hand. 2 Turn upper ring B anticlockwise with the other hand until the drill chuck opening is large enough to accept the tool. 3 3 Insert the drill or the screwdriver bit into the drill chuck. 4 Turn ring B clockwise until the tool is clamped tightly. Remove the tool in the opposite way. Fig. 3 7.
PAGE 9
POWX0057 7.4 EN Switch (Fig. 5 & Fig. 6) Fig. 5 Fig. 6 The drill is started and stopped by depressing and releasing the ON/OFF switch trigger (7). This cordless drill is equipped with an electric brake, when the ON/OFF switch trigger is released completely the chuck stops immediately. 7.4.1 Rotation (right/left/lock) Direction of rotation is controlled by the direction of rotation selector (6) located above the switch trigger.
PAGE 10
POWX0057 7.6 EN Speed selector (Fig. 7) Low speed High speed Fig. 7 NOTE： the -mark is the “Low speed” position, the -mark is the “High speed” position (marks moulded in the button of two speed selector (3).) The drill has a two-speed gear box designed for drilling at (LOW) or (HIGH) speed. The gear selector is located on top of the drill to select either low or high speed. When you push the button (5) forward and select low speed range, the speed will decrease but will provide more power and torque.
PAGE 11
POWX0057 7.8 EN Magnetic Drill/Bit Holder and Bit Holder At the base of the cordless drill there is a magnetic drill/bit holder (12). It can be used to hold various drill/bits while completing a job. Fig. 9 7.9 To recharge the battery pack If you press the button for LCD battery capacity indicator (5) on the cordless drill, you can check the capacity status of the battery. Before use the machine, please press the button to check if the battery is full enough for properly working.
PAGE 12
EN POWX0057 7.10.1 Drilling in wood For maximum performance, use high speed steel (HSS° drills for wood drilling, turn the torque setting on the drill position“ ”. Begin drilling at a very low speed to prevent the bit from slipping off the starting point. Increase the speed as the drill bit bites into the material. When drilling through holes, place a block of wood behind the work piece to prevent ragged or edges on the back side of the hole. 7.10.
PAGE 13
EN POWX0057 11 WARRANTY                This product is warranted for a 36-month period effective from the date of purchase by the first user. This warranty covers all material or production flaws excluding : batteries, chargers, defective parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects resulting from maltreatment, accidents or alterations; nor the cost of transportation.
PAGE 14
EN POWX0057 13 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, Product: Cordless drill/screwdriver 18V Trade mark: POWERplus Model: POWX0057 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.