Operation Manual

ManualsBrandsPowerplus ManualsScrewdriverPOWX00593

POWX00593 EN

1 APPLICATION ................................................................................... 3

2 DESCRIPTION (FIG. A) ..................................................................... 3

3 PACKAGE CONTENT LIST .............................................................. 3

4 SYMBOLS .......................................................................................... 4

5 GENERAL SAFETY WARNINGS AND INSTRUCTIONS ................. 4

5.1 Working area ............................................................................................................. 4

5.2 Electrical safety ......................................................................................................... 4

5.3 Personal safety ......................................................................................................... 5

5.4 Power tool use and care ........................................................................................... 5

5.5 Service ....................................................................................................................... 5

6 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND

CHARGERS ....................................................................................... 5

6.1 Batteries (9) ............................................................................................................... 5

6.2 Chargers (8) ............................................................................................................... 6

7 FEATURES ........................................................................................ 6

7.1 Li-ion battery (9) ........................................................................................................ 6

7.2 Keyless chuck (1) ...................................................................................................... 6

7.3 Torque adjustment ring (2) ....................................................................................... 7

7.4 On/off switch (5) ........................................................................................................ 7

7.5 Forward/reverse selector (right/left rotation selector) (4) ....................................... 7

7.6 Speed selector (3) ..................................................................................................... 7

7.7 LED worklight (6) ....................................................................................................... 7

7.8 TPR soft grip ............................................................................................................. 7

8 (PRE)OPERATION ............................................................................ 7

8.1 Battery charging........................................................................................................ 7

8.2 To install or remove the battery pack ...................................................................... 8

8.2.1 To remove the battery ................................................................................................. 8

8.2.2 To install the battery .................................................................................................... 8

8.3 Installing/removing bits and drills ........................................................................... 8

8.3.1 Installing bits/drills ....................................................................................................... 8

8.3.2 Removing bits/drills ..................................................................................................... 8

Summary of content (12 pages)

PAGE 1
POWX00593 EN 1 APPLICATION ................................................................................... 3 2 DESCRIPTION (FIG. A) ..................................................................... 3 3 PACKAGE CONTENT LIST .............................................................. 3 4 SYMBOLS .......................................................................................... 4 5 GENERAL SAFETY WARNINGS AND INSTRUCTIONS ................. 4 5.1 Working area ....................
PAGE 2
POWX00593 EN 8.4 General hints for drilling ........................................................................................... 8 8.4.1 Drilling in all materials ................................................................................................. 8 8.4.2 Metal drilling ................................................................................................................ 9 8.4.3 Wood drilling .............................................................................
PAGE 3
EN POWX00593 DRILL/SCREWDRIVER 18V LI-ION POWX00593 1 APPLICATION The power tool is intended for driving and drilling through wood, metal, plastics and masonry. It is not designed for commercial use. WARNING! For your own safety, read this manual and the general safety instructions carefully before using the appliance. Your power tool should only be given to other users together with these instructions. 2 1. 2. 3. 4. 5. 3      DESCRIPTION (FIG.
PAGE 4
EN POWX00593 4 SYMBOLS In this manual and/or on the machine the following symbols are used: 5 Denotes risk of personal injury or damage to the tool. Read manual before use. In accordance with essential safety standards of applicable European directives. Class II - The machine is double insulated; earth wire is therefore not necessary. Do not expose charger and battery pack to water Risk of fire! Only use the battery charger indoors.
PAGE 5
EN POWX00593 5.3 Personal safety  Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or medication. A moment of inattention when operating a power tool may result in serious personal injury.  Use safety equipment. Always wear eye protection.
PAGE 6
EN POWX00593      Charge only using the charger provided with the tool. When disposing of batteries, follow the instructions given in the section “Protecting the environment”. Do not cause short circuits. If connection is made between the positive (+) and negative (-) terminal directly or via accidental contact with metallic objects, the battery is short circuited and an intense current will flow causing heat generation which may lead to casing rupture or fire. Do not heat.
PAGE 7
POWX00593 EN 7.3 Torque adjustment ring (2) The drill has a torque adjustment ring. It allows you to select the desired torque depending on the task you have to perform (drill / different types of screws into different materials). The proper setting depends on the type of material and the size of screw you are using. TO ADJUST TORQUE: Identify the 21+1 torque indicator settings located on the front of the drill. Rotate adjusting ring (2) to the desired setting.
PAGE 8
EN POWX00593 Loading procedure (3-5 hours):  Connect the charger to the power supply. The red light is not lit.  Place the battery in the loader. The red light will be lit.  Even after the battery has been fully charged (after 3-5 hours), the red light will remain lit!  The battery indication LEDs (yellow, green, red) on the device will show the status of the battery, when the ON/OFF switch (5) is pressed. If only the red light is lit, the battery needs to be charged. 8.2 8.2.
PAGE 9
POWX00593 8.4.2 EN Metal drilling Support thin material with a piece of scrap wood. Use a center punch to mark the position of the hole. If drilling a large hole, use a small size drill bit first to establish a pilot hole then use the required large size drill bit. Use only HSS (High Speed Steel) drill bits or those recommended for metal use. When drilling into iron or steel, use no lubricant but withdraw the drill regularly to assist cooling. 8.4.
PAGE 10
EN POWX00593 11 TECHNICAL DATA Rotation Speed Max. Drill-bit diameter Rated Voltage DC (Un) Battery capacity Battery type Max. torque Number of LED’s Chuck type Torque positions Plug Type Charger output voltage /current Charger time Battery quantity 12 0-350 / 0-1300 min-1 10 mm 18 V 1500 mAh Li-ion 38 Nm 1 10 mm keyless Chuck 21+1 VDE 21 V / 1 A 5H 3 NOISE Noise values measured according to relevant standard.
PAGE 11
POWX00593       14 EN Acceptance of claims under warranty can never lead to the prolongation of the warranty period nor commencement of a new warranty period in case of a device replacement. Devices or parts which are replaced under the warranty therefore remain the property of Varo NV. We reserve the right to reject a claim whenever the purchase cannot be verified or when it is clear that the product has not been properly maintained.
PAGE 12
EN POWX00593 15 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, Product: DRILL/SCREWDRIVER 18V LI-ION trade mark: POWERplus model: POWX00593 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.