Operation Manual

ManualsBrandsPowerplus ManualsToolsPOWX0075LI

POWX0075LI EN

1 APPLICATION ................................................................................ 3

2 DESCRIPTION (FIG. A) .................................................................. 3

3 PACKAGE CONTENT LIST ............................................................ 3

4 SYMBOLS ....................................................................................... 4

5 GENERAL POWER TOOL SAFETY WARNINGS ......................... 4

5.1 Working area .......................................................................................................... 4

5.2 Electrical safety ..................................................................................................... 4

5.3 Personal safety ...................................................................................................... 5

5.4 Power tool use and care ........................................................................................ 5

5.5 Service .................................................................................................................... 5

6 SPECIAL SAFETY INSTRUCTIONS FOR JIG SAWS .................. 5

7 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND

CHARGERS .................................................................................... 6

7.1 Batteries ................................................................................................................. 6

7.2 Chargers ................................................................................................................. 6

8 OPERATION.................................................................................... 7

8.1 Charging the battery pack ..................................................................................... 7

8.1.1 Charging indication (Fig 1) ....................................................................................... 7

8.2 Inserting and removing the battery (Fig 2) ........................................................... 8

8.3 Replacing saw blades (See Fig. 3) ........................................................................ 8

8.4 Angle cutting adjustment (See Fig 4) ................................................................... 8

8.5 Switch on and off (See Fig. 5) ............................................................................... 8

8.6 Cutting-Orbital or Straight (Pendulum switch)(7) ................................................ 8

9 OPERATION.................................................................................... 9

9.1 Special notes on jig sawing .................................................................................. 9

9.1.1 Sawing wood ........................................................................................................... 9

9.1.2 Sawing metal ........................................................................................................... 9

9.1.3 Sawing plastic .......................................................................................................... 9

10 CLEANING AND MAINTENANCE ................................................. 9

10.1 Cleaning ................................................................................................................. 9

10.2 Maintenance ........................................................................................................... 9

Summary of content (12 pages)

PAGE 1
POWX0075LI EN 1 APPLICATION ................................................................................ 3 2 DESCRIPTION (FIG. A) .................................................................. 3 3 PACKAGE CONTENT LIST............................................................ 3 4 SYMBOLS ....................................................................................... 4 5 GENERAL POWER TOOL SAFETY WARNINGS ......................... 4 5.1 Working area .............................
PAGE 2
11 POWX0075LI EN TECHNICAL DETAILS .................................................................. 10 12 NOISE ............................................................................................ 10 13 WARRANTY .................................................................................. 10 14 ENVIRONMENT ............................................................................ 11 14.1 Battery pack ..................................................................................
PAGE 3
EN POWX0075LI JIGSAW 18.0V POWX0075LI 1 APPLICATION The power tool is intended for sawing wood, metal and plastics. It is not designed for commercial use. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions. 2 DESCRIPTION (FIG. A) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.
PAGE 4
EN POWX0075LI 4 SYMBOLS In this manual and/or on the machine the following symbols are used: Denotes risk of personal injury or damage to the tool. In accordance with essential requirements of the European directive(s) Read manual before use "Class II - The machine is double insulated; Earthing wire is therefore not necessary (only for charger) Ambient temperature 40°C max.
PAGE 5
EN POWX0075LI 5.3 Personal safety  Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or medication. A moment of inattention when operating a power tool may result in serious personal injury.  Use safety equipment. Always wear eye protection.
PAGE 6
EN POWX0075LI          When using jig saws ear protectors and a face mask should be worn. Exposure to noise can cause damage to hearing. Do not use the jig saw to cut asbestos or materials containing asbestos. Do not leave power tools running unattended. Always switch off and do not put down or leave until it has stopped completely. Long hair must be covered. Do not work in loose fitting clothing. Be careful when working on walls.
PAGE 7
EN POWX0075LI   Do not probe the charger. The charger is intended for indoor use only. 8 OPERATION 8.1 Charging the battery pack The battery pack for this tool is supplied in a low charge condition to prevent possible problems, therefore, you have to charge the battery before first use. Note: Batteries will not reach full charge the first time they are charged. Allow several cycles for the item to fully charge. The battery should only be charged indoors.
PAGE 8
EN POWX0075LI NOTE: Remove battery pack from charger stand which use your thumb or fingers, press the battery’s release button in and pull the battery pack off at the same time. 8.2 Inserting and removing the battery (Fig 2)  Remove the battery pressing the battery latches and at the same time pull the battery pack off.  To insert the battery, push the battery pack onto the contacts of the tool. 8.3 Replacing saw blades (See Fig. 3) Disconnect the battery pack (5) from the cordless jig saw.
PAGE 9
EN POWX0075LI 9 OPERATION Hold the saw in front of you with a firm grip on the handle. Ensure that the saw blade is not touching anything when starting the saw. Make sure that the item is clamped tight, and that the saw line is clearly marked. Connect the vacuum extractor nozzle to an extractor system where possible. Start the saw. Place the soleplate on the item, and let the saw blade touch the saw line. Saw, but do not place more pressure on the blade than is necessary.
PAGE 10
EN POWX0075LI 11 TECHNICAL DETAILS Rated voltage Rotation speed Battery capacity Battery type LED worklight Number of LED’s Pendular positions Carbon brush motor Adjustable base Stroke height Cutting depth steel Cutting depth wood Cutting depth plastic Connection type Quick change blades Lock button Base material Battery connection Charging time 18V 0-2400min-1 1500mAh Li-ion Yes 1 4 Yes Yes 19mm 8mm 65mm 20mm T-shank Yes Yes Steel Slide-on 1 hour 12 NOISE Noise emission values measured according to rele
PAGE 11
POWX0075LI         EN At the same time, no claim can be made on the warranty if the damage of the device is the result of negligent maintenance or overload. Definitely excluded from the warranty is damage resulting from fluid permeation, excessive dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate usage (use for purposes for which the device is not suitable), incompetent usage (e.g.
PAGE 12
EN POWX0075LI 15 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, Product: JIG SAW 18.0V Trade mark: POWERplus Model: POWX0075LI is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.