User Manual

ManualsBrandsPowerplus ManualsPower sawsPOWX0076LI CIRCULAR SAW 18V LI-ION 165MM ONE FITS ALL EN

POWX0076LI EN

1 APPLICATION .................................................................................. 3

2 DESCRIPTION (FIG. A) ................................................................... 3

3 PACKAGE CONTENT LIST ............................................................. 3

4 SYMBOLS ........................................................................................ 4

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4

5.1 Work area ................................................................................................................ 4

5.2 Electrical safety ....................................................................................................... 4

5.3 Personal safety ....................................................................................................... 5

5.4 Power tool use and care ......................................................................................... 5

5.5 Service ..................................................................................................................... 5

6 SPECIFIC SAFETY WARNINGS FOR CIRCULAR SAWS............. 5

7 ADDITIONAL SAFETY INSTRUCTIONS FOR LASERS ................ 6

8 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND

CHARGERS ..................................................................................... 6

8.1 Batteries .................................................................................................................. 6

8.2 Chargers .................................................................................................................. 7

9 ADJUSTMENTS ............................................................................... 7

9.1 Replacing the saw blade (Fig. 1) ............................................................................ 7

9.2 Adjusting the depth of cut (Fig. 2) ......................................................................... 8

9.3 Setting the mitre angle (Fig. 3) ............................................................................... 8

9.4 Mounting the parallel fence (Fig. 4) ....................................................................... 8

10 OPERATION ..................................................................................... 8

10.1 Instructions for use ................................................................................................. 8

10.2 Switching on and off (Fig. 5) .................................................................................. 8

10.3 Dust extraction ........................................................................................................ 8

10.4 Laser beam .............................................................................................................. 8

11 CLEANING AND MAINTENANCE ................................................... 9

11.1 Cleaning................................................................................................................... 9

11.2 Lubrication .............................................................................................................. 9

12 TECHNICAL DATA .......................................................................... 9

Summary of content (11 pages)

PAGE 1
POWX0076LI EN 1 APPLICATION .................................................................................. 3 2 DESCRIPTION (FIG. A) ................................................................... 3 3 PACKAGE CONTENT LIST ............................................................. 3 4 SYMBOLS ........................................................................................ 4 5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4 5.1 Work area .........................
PAGE 2
13 POWX0076LI EN NOISE ............................................................................................... 9 14 SERVICE DEPARTMENT .............................................................. 10 15 STORAGE ...................................................................................... 10 16 WARRANTY ................................................................................... 10 17 ENVIRONMENT .............................................................................
PAGE 3
EN POWX0076LI CORDLESS CIRCULAR SAW 18V POWX0076LI 1 APPLICATION Your circular saw has been designed for sawing wooden workpieces. The machine is only suitable for right-hand use. The machine is not suitable for stationary use. It is not designed for commercial use. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions. 2 DESCRIPTION (FIG. A) 1. 2. 3. 4. 5. 6. 7. 8. 9.
PAGE 4
EN POWX0076LI 4 SYMBOLS In this manual and/or on the machine the following symbols are used: Denotes risk of personal injury or damage to the tool. In accordance with essential requirements of the European directive(s) Read manual before use "Class II - The machine is double insulated; Earthing wire is therefore not necessary (only for charger) Do not expose charger and battery pack to water Ambient temperature 40°C max.
PAGE 5
EN POWX0076LI 5.3 Personal safety  Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.  Use safety equipment. Always wear eye protection.
PAGE 6
EN POWX0076LI                   Replace a broken tension spring before using the machine again.  Never remove the riving knife. The distance between the toothed rim and the riving knife should be 5 mm maximum. The height difference between the riving knife and the toothed rim should be 5 mm maximum. Do not use saw blades made of HSS steel. Do not use bent, deformed or otherwise damaged saw blades. Do not use saw blades which do not meet the specifications stated in this manual.
PAGE 7
POWX0076LI EN  Do not cause short circuits. If connection is made between the positive (+) and negative (-) terminal directly or via accidental contact with metallic objects, the battery is short circuited and an intense current will flow causing heat generation which may lead to casing rupture or fire.  Do not heat.
PAGE 8
EN POWX0076LI 9.2 Adjusting the depth of cut (Fig. 2) The depth of cut is infinitely adjustable. A clean cut is achieved with the saw blade protruding from the material by approx. 3 mm.  Loosen the lock lever for depth adjustment (5).  Hold the base plate (10) flat against the edge of the work piece and lift the body of the saw until the blade is at the right depth determined by the depth gauge (4) (align the scale line).  Tighten the lock lever for depth adjustment. 9.3 Setting the mitre angle (Fig.
PAGE 9
EN POWX0076LI 11 CLEANING AND MAINTENANCE Attention !Before performing any work on the equipment, pull the power plug. 11.1 Cleaning  Keep the ventilation slots of the machine clean to prevent overheating of the engine.  Regularly clean the machine housing with a soft cloth, preferably after each use.  Keep the ventilation slots free from dust and dirt.  If the dirt does not come off use a soft cloth moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water, etc.
PAGE 10
EN POWX0076LI 14 SERVICE DEPARTMENT   Damaged switches must be replaced by our after-sales service department. If the connecting cable (or mains plug) is damaged, it must be replaced by a particular connecting cable which is available from our service department. Replacement of the connecting cable must only be carried out by our service department (see last page) or by a qualified person (qualified electrician). 15 STORAGE     Thoroughly clean the whole machine and its accessories.
PAGE 11
EN POWX0076LI 17 ENVIRONMENT Should your appliance need replacement after extended use, do not discard it with the household rubbish but dispose of it in an environmentally safe way. Waste produced by electrical machine items should not be handled like normal household rubbish. Please recycle where recycle facilities exist. Check with your Local Authority or retailer for recycling advice. BATTERY PACK This product contains Li-ion.