User Manual

POWX0076LI EN
Copyright © 2013 VARO P a g e | 9 www.varo.com
11 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull the power
plug.
11.1 Cleaning
 Keep the ventilation slots of the machine clean to prevent overheating of the engine.
 Regularly clean the machine housing with a soft cloth, preferably after each use.
 Keep the ventilation slots free from dust and dirt.
 If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
11.2 Lubrication
From time to time, apply a drop of oil to the thread of the lock screw (18).
12 TECHNICAL DATA
Model nr.
POWX0076LI
Rated voltage (direct current)
18 V
Rotation speed
4000 min-1
Max. speed rating saw blade
7000 min-1
Charging time
+/-1 hour
Battery type
1500 mAh Li-Ion
Charger rated voltage
230 V
Charger frequency
50 Hz
Saw blade
Ø 165 x Ø 20 x 2.4 mm
Max. depth of cut 90°
52 mm
Max. depth of cut 45°
36 mm
Mitre angle
0 – 45°
13 NOISE
Noise values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
73 dB(A)
Acoustic power level LwA
84 dB(A)
ATTENTION! The sound power level may exceed 85 dB(A), in this case
individual hearing protection shall be worn.
aw (Vibration)
1,7 m/s²
K = 1.5 m/s²