User Manual

ManualsBrandsPowerplus ManualsPower ToolsPOWX0178LI HAMMER DRILL 14,4V LI-ION EN

POWX0178LI

1 APPLICATION ............................................................................ 3

2 DESCRIPTION (FIG. A) .............................................................. 3

3 PACKAGE CONTENT LIST........................................................ 3

4 SYMBOLS .................................................................................. 4

5 GENERAL SAFETY WARNINGS AND INSTRUCTIONS ........... 5

5.1 Work area ................................................................................... 5

5.2 Electrical safety ......................................................................... 5

5.3 Personal safety .......................................................................... 6

5.4 Power tool use and care ........................................................... 6

5.5 Service ....................................................................................... 7

6 SPECIFIC SAFETY WARNINGS ................................................ 7

7 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND

CHARGERS ............................................................................... 8

8 FEATURES ................................................................................. 9

9 (PRE)OPERATION ..................................................................... 9

9.1 Charging the battery ................................................................. 9

9.2 Charging the Tool ................................................................... 10

9.2.1 Inserting SDS-Plus Drilling Tools (see figure B) 11

9.2.2 Removing SDS-Plus Drilling Tools (see figure C) 11

9.2.3 Dust/Chip Extraction 11

10 OPERATION ............................................................................. 11

10.1 Setting the Operating Mode .................................................... 11

10.2 Reversing the Rotational Direction (see figure D) ................. 12

10.3 Switching On and Off .............................................................. 12

Summary of content (17 pages)

PAGE 1
POWX0178LI EN 1 APPLICATION ............................................................................ 3 2 DESCRIPTION (FIG. A) .............................................................. 3 3 PACKAGE CONTENT LIST........................................................ 3 4 SYMBOLS .................................................................................. 4 5 GENERAL SAFETY WARNINGS AND INSTRUCTIONS ........... 5 5.1 Work area..........................................................
PAGE 2
10.4 POWX0178LI EN Setting the Speed/Impact Rate ............................................... 13 10.5 Battery Charge-control Indication .......................................... 13 10.6 Temperature Dependent Overload Protection ....................... 13 11 CLEANING AND MAINTENANCE ............................................ 13 11.1 Cleaning ................................................................................... 14 12 TECHNICAL DATA................................................
PAGE 3
POWX0178LI EN CORDLESS ROTARY HAMMER 3 IN 1 POWX0178LI 1 APPLICATION The machine is intended for hammer drilling in concrete, brick and stone. It is also suitable for drilling without impact in wood, metal, ceramic and plastic. Machines with electronic control and right/left rotation are also suitable for screw driving It is not designed for commercial use. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety.
PAGE 4
POWX0178LI EN WARNING Packing materials are no toys! Children must not play with plastic bags! Danger of suffocation! − Cordless rotary hammer 3 in 1 − 4 x SDS bits − 3 x SDS drill − 3 x Drill for metal − − − − 3 x Drill for wood 20 x 50mm bits 1 x keyless chuck 1 x adaptor When parts are missing or damaged, please contact your dealer. 4 SYMBOLS In this manual and/or on the machine the following symbols are used: Only use the battery charger indoors.
PAGE 5
POWX0178LI EN 5 GENERAL SAFETY WARNINGS AND INSTRUCTIONS Warning! Read all safety warnings and instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool. 5.1 Work area Keep work area clean and well lit.
PAGE 6
POWX0178LI EN 5.3 Personal safety Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Use safety equipment. Always wear eye protection.
PAGE 7
POWX0178LI EN Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Maintain power tools.
PAGE 8
POWX0178LI EN Always wait until the machine has come to a complete stop before placing it down. Before any work on the machine (e. g., maintenance, tool change, etc.) as well as during transport and storage, set the rotational direction switch to the centre position. Avoid unintentional switching on. Ensure the On/Off switch is in the off position before inserting battery pack. In case of damage and improper use of the battery, vapours may be emitted.
PAGE 9
EN POWX0178LI Chargers 1. Use the charger provided with the tool only to charge the battery 2. Never attempt to charge non-rechargeable batteries. 3. Have defective cords replaced immediately. 4. Do not expose to water. 5. Do not open the charger. 6. Do not probe the charger. 7. The charger is intended for indoor use only.
PAGE 10
POWX0178LI EN TO CHARGE ! Charge battery pack only with the charger provided ! Using an other charger can cause severe damage or even cause battery to explode WARNING! Do not continue to press the On/Off switch after the machine has been automatically switched off. The battery can be damaged. The battery is equipped with a NTC temperature control which allows charging only within a temperature range of between 0 °C and 45 °C. A long battery service life is achieved in this manner.
PAGE 11
POWX0178LI EN The SDS-Plus tool holder can also accommodate different drill-bit types with hexagon shank. Use only bit with SDS-Plus. Other bits can be used with a keyless chuck with SDS-Plus. The dust protection cap largely prevents the entry of drilling dust into the tool holder during operation. When inserting the tool, take care that the dust protection cap is not damaged. A damaged dust protection cap should be changed immediately. We recommend having this carried out by an after-sales service. 9.2.
PAGE 12
POWX0178LI EN Note: Change the operating mode only when the machine is switched off! Otherwise, the machine can be damaged. To change the operating mode, turn the selector switch for “drilling/hammer drilling” to the requested position. Position for hammer drilling in concrete or stone Position for drilling without impact in wood, metal, ceramic and plastic as well as for screwdriving 10.
PAGE 13
POWX0178LI EN For low temperatures, the power tool reaches the full hammer/impact capacity only after a certain time. 10.4 Setting the Speed/Impact Rate The speed/impact rate of the switched on power tool can be variably adjusted, depending on how far the On/Off switch is pressed. Light pressure on the On/Off switch results in low speed/impact rate. Further pressure on the switch increases the speed/impact rate. 10.
PAGE 14
POWX0178LI EN 11.1 Cleaning Keep the ventilation slots of the machine clean to prevent overheating of the engine. Regularly clean the machine housing with a soft cloth, preferably after each use. Keep the ventilation slots free from dust and dirt. If the dirt does not come off use a soft cloth moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts. 12 TECHNICAL DATA Chuck 10 mm keyless Voltage No load speed 14.
PAGE 15
POWX0178LI EN SOUND EMISSION Noise emission values measured according to relevant standard. LpA (Sound pressure level) : 91,5 dB(A) K = 3 dB(A) LwA (Sound power level) : 80,5 dB(A) K = 3 dB(A) ATTENTION ! The sound power pressure may exceed 85 dB(A), in this case individual hearing protection must be worn. aw (Vibration) : 5,915 m/s² K = 1.5 m/s² 13 SERVICE DEPARTMENT Damaged switches must be replaced by our after-sales service department.
PAGE 16
POWX0178LI EN We reserve the right to reject any claim where the purchase cannot be verified or when it is clear that the product has not been properly maintained. (Clean ventilation slots, carbon brushes serviced regularly,…) Your purchase receipt must be kept as proof of date of purchase. Your appliance must be returned un-dismantled to your dealer in an acceptably clean state, (in its original blow moulded case if applicable to the unit), accompanied by your proof of purchase.
PAGE 17
POWX0178LI EN 17 DECLARATION OF CONFORMITY VARO N.V. Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, product : Cordless Rotary Hammer 3 IN 1 trade mark : POWERplus model : POWX0178LI is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.