User Manual

ManualsBrandsPowerplus ManualsPower ToolsPOWX046 BELT SANDER 950W EN

POWX046 EN

1 APPLIANCE ..................................................................................... 2

2 DESCRIPTION ................................................................................. 2

3 PACKAGE CONTENT LIST ............................................................. 2

4 SYMBOLS ........................................................................................ 2

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 3

5.1 Work area ................................................................................................................ 3

5.2 Electrical safety ....................................................................................................... 3

5.3 Personal safety ....................................................................................................... 3

5.4 Power tool use and care ......................................................................................... 4

5.5 Service ..................................................................................................................... 4

6 ADDITIONAL SAFETYHINTS FOR BELT SANDERS .................... 4

7 OPERATION ..................................................................................... 5

7.1 Switching Onoff ...................................................................................................... 5

7.2 Continuous operation / ON/OFF lock button ......................................................... 5

7.3 Speed adjusting dial ............................................................................................... 5

7.4 Mounting a sanding belt (fig. B) ............................................................................. 5

7.5 Collecting the dust .................................................................................................. 5

8 CLEANING AND MAINTENANCE ................................................... 5

8.1 Cleaning................................................................................................................... 6

9 TECHNICAL DATA .......................................................................... 6

10 NOISE ............................................................................................... 6

11 SERVICE DEPARTMENT ................................................................ 6

12 STORAGE ........................................................................................ 6

13 WARRANTY ..................................................................................... 7

14 ENVIRONMENT ............................................................................... 7

15 DECLARATION OF CONFORMITY ................................................ 8

Summary of content (8 pages)

PAGE 1
POWX046 EN 1 APPLIANCE ..................................................................................... 2 2 DESCRIPTION ................................................................................. 2 3 PACKAGE CONTENT LIST ............................................................. 2 4 SYMBOLS ........................................................................................ 2 5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 3 5.1 Work area ......................
PAGE 2
EN POWX046 BELT SANDER POWX046 1 APPLIANCE The sander is used to sand and buff wood, plastic and similar materials. It is very important to use the correct sandpaper!!!! It is not designed for commercial use. WARNING! Read this manual carefully before using the machine, for your own safety. Your power tool should only be passed on with these instructions. 2 DESCRIPTION 1. 2. 3. 4. 5. 6.
PAGE 3
POWX046 EN 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool. 5.1 Work area  Keep work area clean and well lit. Cluttered and dark areas invite accidents.
PAGE 4
EN POWX046  If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust related hazards. 5.4 Power tool use and care  Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.  Do not use the power tool if the switch does not turn it on and off.
PAGE 5
EN POWX046 7 OPERATION Do not sand plaster surfaces, (WARNING: In this case your guarantee becomes void) this may clog the motor (brushes, ball bearings, ..). 7.1 Switching Onoff  To switch the tool on, press the on/off switch (1).  To switch the tool off, release the on/off switch. 7.2 Continuous operation / ON/OFF lock button to switch on :  Hold the on/off switch pressed  Press the lock button  release the on/off switch to switch off : press the on/off switch once to release the lockon button 7.
PAGE 6
EN POWX046 8.1     Cleaning Keep the ventilation slots of the machine clean to prevent overheating of the engine. Regularly clean the machine housing with a soft cloth, preferably after each use. Keep the ventilation slots free from dust and dirt. If the dirt does not come off use a soft cloth moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts.
PAGE 7
POWX046 EN 13 WARRANTY               This product is warranted for a 36-month period effective from the date of purchase by the first user. This warranty covers all material or production flaws excluding : batteries, chargers, defective parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects resulting from maltreatment, accidents or alterations; nor the cost of transportation.
PAGE 8
EN POWX046 15 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, product : Belt Sander trade mark : POWERplus model : POWX046 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.