Operation Manual

POWX0474 EN

10 TROUBLE SHOOTING

Should the machine fail to function correctly, a number of possible causes and the appropriate

solutions are given below:

10.1 Machine fails to operate.

 Power turned off.

 (Extension) cable damaged.

10.2 The elektromotor hardly reaches maximum speed.

 The extension cable is too thin and/or too long.

 The mains voltage is lower than 230 V.

10.3 Machine overheats.

 Air vents are blocked. Clean them with a dry cloth.

 The machine has been overloaded. Use the machine for the purpose it is made for

10.4 Excessive sparking or elektromotor runs irregular.

 There’s dirt inside the motor or the carbon brushes are worn.

 Replace the carbon brushes or bring the machine to a specialized repair centre.

Repairs and servicing should only be carried out by a qualified technician

or service firm.

11 TECHNICAL DETAILS

Model nr.

POWX0474

Rated voltage AC (Un)

230V

Rated frequency (fn)

50Hz

Rated power (Pn)

1200W

Rotation speed (n)

600 – 3300min

-1

Disc diameter

180mm

Spindle lock

M 14

12 NOISE

Noise emission values measured according to relevant standard. (K=3)

Acoustic pressure level LpA

86 dB(A)

Acoustic power level LwA

97 dB(A)

ATTENTION! Wear hearing protection when sound pressure is over 85

dB(A).

aw (Vibration):

7.8 m/s²

K = 1.5 m/s²