User Manual

ManualsBrandsPowerplus ManualsPower sawsPOWX055 CIRCULAR SAW 1800W 210MM EN

POW1044 EN

1 APPLICATION .................................................................................. 3

2 DESCRIPTION ................................................................................. 3

3 PACKAGE CONTENT LIST ............................................................. 3

4 SYMBOLS ........................................................................................ 4

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4

5.1 Work area ................................................................................................................ 4

5.2 Electrical safety ....................................................................................................... 4

5.3 Personal safety ....................................................................................................... 4

5.4 Power tool use and care ......................................................................................... 5

5.5 Service ..................................................................................................................... 5

6 SPECIFIC SAFETY WARNINGS FOR CIRCULAR SAWS............. 5

7 ASSEMBLY ...................................................................................... 6

7.1 Replacing the saw blade ......................................................................................... 6

7.2 Adjusting the depth of cut ...................................................................................... 6

7.3 Setting the mitre angle............................................................................................ 6

7.4 Mounting the parallel fence .................................................................................... 7

8 OPERATION ..................................................................................... 7

8.1 Instructions for use ................................................................................................. 7

8.2 Switching on and off ............................................................................................... 7

8.3 Dust extraction ........................................................................................................ 7

9 CLEANING AND MAINTENANCE ................................................... 8

9.1 Cleaning................................................................................................................... 8

9.2 Checking and replacing the carbon brushes ........................................................ 8

9.3 Lubrication .............................................................................................................. 8

10 TECHNICAL DATA .......................................................................... 8

11 NOISE ............................................................................................... 8

12 SERVICE DEPARTMENT ................................................................ 9

13 STORAGE ........................................................................................ 9

14 WARRANTY ..................................................................................... 9

15 ENVIRONMENT ............................................................................. 10

Summary of content (10 pages)

PAGE 1
POW1044 EN 1 APPLICATION .................................................................................. 3 2 DESCRIPTION ................................................................................. 3 3 PACKAGE CONTENT LIST ............................................................. 3 4 SYMBOLS ........................................................................................ 4 5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4 5.1 Work area .......................
PAGE 3
EN POW1044 CIRCULAR SAW 1200W POW1044 1 APPLICATION Your circular saw has been designed for sawing wooden workpieces. The machine is only suitable for right-hand use. The machine is not suitable for stationary use. It is not designed for commercial use. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions. 2 DESCRIPTION 1. 2. 3. 4. 5. 6. 7. 8.
PAGE 4
EN POW1044 4 SYMBOLS In this manual and/or on the machine the following symbols are used: Class II - The machine is double Denotes risk of personal insulated; Earthing wire is injury or damage to the tool. therefore not necessary. Read the manual carefully before use. Always wear safety goggles In accordance with essential requirements of the European directive(s) 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and all instructions.
PAGE 5
EN POW1044       Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used whenever conditions require will reduce personal injuries. Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. Remove any adjusting key or wrench before turning the power tool on.
PAGE 6
EN POW1044 7 ASSEMBLY 7.1 Replacing the saw blade Only use sharp and undamaged saw blades. Cracked or bent saw blades must be replaced immediately.  Place the circular saw on its side on a flat surface  Rotate the saw blade by hand while depressing the spindle locking button until the blade locked. Turn the blade clap bolt anti-clockwise by using the hex key.  Remove the flange.  Raise the guard by using the lever guard and then remove the saw blade.
PAGE 7
POW1044 7.4 EN Mounting the parallel fence The parallel fence allows sawing parallel to an edge at a maximum distance of 10 cm.  Loosen the lock know of edge guide.  Slide the edge guide through the slots in the shoe to the desired width.  Tighten the lock bolt to secure it in the position.  Ensure that the edge guide rests against the wood along its entire length to give a consistent parallel cuts. 8 OPERATION 8.1 Instructions for use  Clamp the workpiece.
PAGE 8
EN POW1044 9 CLEANING AND MAINTENANCE Attention !Before performing any work on the equipment, pull the power plug. 9.1     Cleaning Keep the ventilation slots of the machine clean to prevent overheating of the engine. Regularly clean the machine housing with a soft cloth, preferably after each use. Keep the ventilation slots free from dust and dirt. If the dirt does not come off use a soft cloth moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water, etc.
PAGE 9
EN POW1044 12 SERVICE DEPARTMENT   Damaged switches must be replaced by our after-sales service department. If the connecting cable (or mains plug) is damaged, it must be replaced by a particular connecting cable which is available from our service department. Replacement of the connecting cable must only be carried out by our service department (see last page) or by a qualified person (qualified electrician). 13 STORAGE     Thoroughly clean the whole machine and its accessories.
PAGE 10
EN POW1044 15 ENVIRONMENT Should your appliance need replacement after extended use, do not discard it with the household rubbish but dispose of it in an environmentally safe way. Waste produced by electrical machine items should not be handled like normal household rubbish. Please recycle where recycle facilities exist. Check with your Local Authority or retailer for recycling advice. 16 DECLARATION OF CONFORMITY VARO N.V.