User Manual

ManualsBrandsPowerplus ManualsPower ToolsPOWX0617 ANGLE GRINDER 2500W 230MM EN

POWX0617 EN

1 APPLICATION .................................................................................. 3

2 DESCRIPTION (FIG. A) ................................................................... 3

3 PACKAGE CONTENT LIST ............................................................. 3

4 SYMBOLS ........................................................................................ 3

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4

5.1 Working area ........................................................................................................... 4

5.2 Electrical safety ....................................................................................................... 4

5.3 Personal safety ....................................................................................................... 4

5.4 Power tool use and care ......................................................................................... 5

5.5 Service ..................................................................................................................... 5

6 SPECIFIC SAFETY INSTRUCTIONS FOR ANGLE GRINDERS ... 5

7 OPERATION ..................................................................................... 6

7.1 Fitting the auxiliary handle ..................................................................................... 6

7.2 Assembly the protective guard .............................................................................. 6

7.3 Replacing the grinding disc ................................................................................... 7

7.4 Switching on / off .................................................................................................... 7

7.4.1 Switching on ............................................................................................................. 8

7.4.2 Switching off ............................................................................................................. 8

7.5 Adjusting the main handle position ....................................................................... 8

8 OPERATON MODES ....................................................................... 9

8.1 Grinding ................................................................................................................... 9

9 FLANGE ARRANGEMENTS WHEN USING GRINDING WHEELS9

9.1 Flange arrangements when using a depressed centre or straight grinding

wheel ........................................................................................................................ 9

10 CLEANING AND MAINTENANCE ................................................... 9

10.1 Cleaning................................................................................................................... 9

10.2 Lubrication .............................................................................................................. 9

11 TECHNICAL DATA ........................................................................ 10

12 SOUND EMISSION ........................................................................ 10

13 SERVICE DEPARTMENT .............................................................. 10

Summary of content (12 pages)

PAGE 1
POWX0617 EN 1 APPLICATION .................................................................................. 3 2 DESCRIPTION (FIG. A) ................................................................... 3 3 PACKAGE CONTENT LIST ............................................................. 3 4 SYMBOLS ........................................................................................ 3 5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4 5.1 Working area ........................
PAGE 2
14 POWX0617 EN STORAGE ...................................................................................... 10 15 WARRANTY ................................................................................... 11 16 ENVIRONMENT ............................................................................. 11 17 DECLARATION OF CONFORMITY .............................................. 12 Copyright © 2013 VARO p a g e |2 www.varo.
PAGE 3
EN POWX0617 ANGLE GRINDER 2500W—230MM POWX0617 1 APPLICATION This machine is developed for grinding and roughing of metal and stone. With help of the correct accessories the machine can also be used for brushing and sanding. It is not designed for commercial use. WARNING! For your own safety, read this manual and the general safety instructions carefully before using the appliance. Your power tool should only be given to other users together with these instructions. 2 DESCRIPTION (FIG. A) 1. 2. 3. 4. 5.
PAGE 4
POWX0617 EN 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions. Failure to heed warnings and follow instructions may result in electric shock, fire and/or serious injury. Keep safety warnings and instructions for future reference. The term "power tool" in the safety warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool. 5.1 Working area  Keep working area clean and well lit. Untidy and dark areas can lead to accidents.
PAGE 5
EN POWX0617  If there are devices for connecting dust extraction and collection facilities, please ensure that they are attached and used correctly. Using such devices can reduce dust-related hazards. 5.4 Power tool use and care  Do not expect the power tool to do more than it can. Use the correct power tool for what you want to do. A power tool will achieve better results and be safer if used in the context for which it was designed.  Do not use the power tool if the switch cannot turn it on and off.
PAGE 6
POWX0617         EN Make sure that the workpiece is sufficiently supported or clamped. Keep your hands away from the surface to be cut. Always wear safety goggles and hearing protection. If desired or required also use another kind of protection like for example an apron or helmet. Ensure that mounted wheels and points are fitted in accordance with the manufacturer’s instructions. Ensure that blotters are used when they are provided with the bonded abrasive product and when they are required.
PAGE 7
POWX0617 EN 1. Loosen the clip of the protective guard (8) by pulling lock lever of protective guard (1) outward. 2. Turn the protective guard so that uncovered part of the disc is as far apart as possible from the hand on main handle (4). 3. Fix the protection guard by pushing the lock lever inwards (the protective guard should no longer be able to move). NOTE: If the protective guard can not be fixed firmly by the lock lever (1), use a hexagon wrench to tighten the hexagon nut.
PAGE 8
POWX0617 EN Fig. 6 7.4.1 Switching on 1. Insert the plug into a correctly installed mains socket. 2. Push forward the ON / OFF switch with safety button (5) (See the arrow (1) on Fig. 6), and at the same time depress it firmly inwards and keep it pressed (See the arrow (2)). 7.4.2   Switching off When you release the switch, the tool turns off. Do not let go of grinder until it has stopped running. The wheel continues to rotate after the tool is switched off. 7.
PAGE 9
EN POWX0617 8 OPERATON MODES 8.1 Grinding Hold the handle (4) and auxiliary handle (7) firmly and switch on. Avoid blocking the ventilation slots with your hand, as this may cause the grinder to overheat. Let the disc reach full speed. Apply the grinder to the item. Maximum effect is achieved when the grinder is held at an angle of 15-30°in relation to the item. Move the grinder gently along the item. Give the grinder time to work.
PAGE 10
EN POWX0617 11 TECHNICAL DATA Voltage / frequency Power input No load speed Max. disc diameter: Drive spindle thread: 230-240 V / 50 Hz 2500 W 6500 min-1 Ø 230 mm M 14 12 SOUND EMISSION Noise emission values measured according to relevant standard. LpA (Sound pressure level) : 94 dB(A) LwA (Sound power level) : 105 dB(A) ATTENTION! Wear hearing protection when sound pressure is over 85 dB(A).
PAGE 11
POWX0617 EN 15 WARRANTY               This product is warranted for a 36-month period effective from the date of purchase by the first user. This warranty covers all material or production flaws excluding : batteries, chargers, defective parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects resulting from maltreatment, accidents or alterations; nor the cost of transportation.
PAGE 12
EN POWX0617 17 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, product: Angle grinder trade mark: POWERplus model: POWX0617 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.