User Manual

ManualsBrandsPowerplus ManualsPower ToolsPOWX066 ANGLE GRINDER 2400W Ø230MM EN

POWX066 EN

1 APPLICATION .................................................................................. 3

2 DESCRIPTION (FIG A) .................................................................... 3

3 PACKAGE CONTENT LIST ............................................................. 3

4 SYMBOLS ........................................................................................ 4

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4

5.1 Working area ........................................................................................................... 4

5.2 Electrical safety ....................................................................................................... 4

5.3 Personal safety ....................................................................................................... 5

5.4 Power tool use and care ......................................................................................... 5

5.5 Service ..................................................................................................................... 5

6 SPECIFIC SAFETY INSTRUCTIONS FOR ANGLE GRINDERS ... 6

7 OPERATION ..................................................................................... 6

7.1 Switch ...................................................................................................................... 6

7.2 Replacing the grinding wheel ................................................................................. 7

7.3 Test run for new grinding wheels .......................................................................... 7

7.4 Motor ........................................................................................................................ 7

7.5 Carbon brushes ...................................................................................................... 7

7.6 Grinding wheels ...................................................................................................... 7

8 OPERATING MODES ...................................................................... 8

8.1 Rough grinding: ...................................................................................................... 8

8.2 Cutting: .................................................................................................................... 8

9 FLANGE ARRANGEMENTS WHEN USING GRINDING WHEELS

AND CUTTING WHEELS ................................................................. 8

9.1 Flange arrangements when using a depressed centre or straight grinding

wheel ........................................................................................................................ 8

9.2 Flange arrangement when using a depressed-centre cutting wheel ................... 8

9.3 Flange arrangement when using a straight cutting wheel ................................... 9

10 CLEANING AND MAINTENANCE ................................................... 9

10.1 Cleaning................................................................................................................... 9

10.2 Lubrication .............................................................................................................. 9

11 TECHNICAL DATA .......................................................................... 9

Summary of content (11 pages)

PAGE 1
POWX066 EN 1 APPLICATION.................................................................................. 3 2 DESCRIPTION (FIG A) .................................................................... 3 3 PACKAGE CONTENT LIST............................................................. 3 4 SYMBOLS ........................................................................................ 4 5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4 5.1 Working area ...........................
PAGE 2
12 POWX066 EN SOUND EMISSION ........................................................................ 10 13 SERVICE DEPARTMENT .............................................................. 10 14 STORAGE ...................................................................................... 10 15 WARRANTY ................................................................................... 10 16 ENVIRONMENT .............................................................................
PAGE 3
EN POWX066 ANGLE GRINDER POWX066 1 APPLICATION This machine is developed for grinding and roughing of metal and stone. With help of the correct accessories the machine can also be used for brushing and sanding. It is not designed for commercial use. WARNING! For your own safety, read this manual and the general safety instructions carefully before using the appliance. Your power tool should only be given to other users together with these instructions. 2 DESCRIPTION (FIG A) 1. 2. 3. 4. 5. 6.
PAGE 4
EN POWX066 4 SYMBOLS In this manual and/or on the machine the following symbols are used: Always wear hearing protection. Always wear safety goggles. Always wear protective gloves. Always wear a dust mask. Indicates electrical shock hazard. Risk of fire! Denotes risk of personal injury or damage to the tool. 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions. Failure to heed warnings and follow instructions may result in electric shock, fire and/or serious injury.
PAGE 5
POWX066 EN 5.3 Personal safety § Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or medication. A moment of inattention when operating a power tool may result in serious personal injury. § Use safety equipment. Always wear eye protection.
PAGE 6
EN POWX066 6 SPECIFIC SAFETY INSTRUCTIONS FOR ANGLE GRINDERS § § § § § § § § § § § § § § § § § § § Check that the maximum speed indicated on the grinding disc corresponds to the maximum speed of the machine. The speed of the machine must not exceed the value on the grinding disc. Make sure that the dimensions of the grinding disc correspond to the specifications of the machine. Make sure that the grinding disc has been mounted and fastened properly.
PAGE 7
EN POWX066 7.2 Replacing the grinding wheel Before performing any work on the equipment, pull the power plug. Simple wheel change by spindle lock: Press the spindle lock and allow the grinding wheel to latch in place. Open the flange nut with the face spanner. Change the grinding or cutting wheel and tighten the flange nut with the face spanner.
PAGE 8
POWX066 EN 8 OPERATING MODES 8.1 Rough grinding: For the best rough grinding results, hold the grinding wheel at an angle of between 30° and 40° to the workpiece surface and guide back and forth over the workpiece in steady movements. 8.2 Cutting: When you use the right-angle grinder for cutting purposes, avoid tilting it in the cutting plane. The cutting wheel must have a clean cutting edge. A diamond cutting wheel is best used to cut hard stone.
PAGE 9
EN POWX066 9.3 Flange arrangement when using a straight cutting wheel 10 CLEANING AND MAINTENANCE Attention! Before performing any work on the equipment, pull the power plug. 10.1 Cleaning § Keep the ventilation slots of the machine clean to prevent overheating of the engine. § Regularly clean the machine housing with a soft cloth, preferably after each use. § Keep the ventilation slots free from dust and dirt. § If the dirt does not come off use a soft cloth moistened with soapy water.
PAGE 10
EN POWX066 12 SOUND EMISSION Noise emission values measured according to relevant standard. LpA (Sound pressure level) : 92.1 dB(A) LwA (Sound power level) : 105.1 dB(A) ATTENTION ! The sound power pressure may exceed 85 dB(A), in this case individual hearing protection must be worn. aw (Vibration) : < 2.547 m/s² 13 SERVICE DEPARTMENT § § Damaged switches must be replaced by our after-sales service department.
PAGE 11
EN POWX066 17 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, product : Angle grinder 2400W – 230mm trade mark : POWERplus model : POWX066 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives as they relate to European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.