Operation Manual

ManualsBrandsPowerplus ManualsSawPOWX0682

POWX0682 EN

1 APPLIANCE ..................................................................................... 3

2 DESCRIPTION (FIG.A) .................................................................... 3

3 PACKAGE CONTENT LIST ............................................................. 3

4 SYMBOLS ........................................................................................ 3

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4

5.1 Work area ................................................................................................................ 4

5.2 Electrical safety ....................................................................................................... 4

5.3 Personal safety ....................................................................................................... 4

5.4 Power tool use and care ......................................................................................... 5

5.5 Service ..................................................................................................................... 5

6 ADDITIONAL SAFETY INSTRUCTIONS ........................................ 5

7 ASSEMBLY ...................................................................................... 6

7.1 Attaching the handle ............................................................................................... 6

7.2 Removing the blades .............................................................................................. 6

7.3 Attaching the blades ............................................................................................... 6

8 OPERATION ..................................................................................... 6

8.1 Operating the saw ................................................................................................... 6

8.2 Switching ON/OFF ................................................................................................... 6

8.3 Feed speed .............................................................................................................. 6

8.4 nstruction for cutting various cross sectional materials...................................... 7

8.5 Lubricant instructions ............................................................................................ 7

8.6 Dust extraction ........................................................................................................ 8

9 CLEANING AND MAINTENANCE ................................................... 8

9.1 Cleaning................................................................................................................... 8

9.2 Checking and replacing the carbon brushes ........................................................ 8

10 TECHNICAL DATA .......................................................................... 8

11 NOISE ............................................................................................... 9

12 SERVICE DEPARTMENT ................................................................ 9

13 STORAGE ........................................................................................ 9

14 TROUBLESHOOTING ..................................................................... 9

Summary of content (11 pages)

PAGE 1
POWX0682 EN 1 APPLIANCE ..................................................................................... 3 2 DESCRIPTION (FIG.A) .................................................................... 3 3 PACKAGE CONTENT LIST ............................................................. 3 4 SYMBOLS ........................................................................................ 3 5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4 5.1 Work area ..........................
PAGE 2
15 POWX0682 EN WARRANTY ................................................................................... 10 16 ENVIRONMENT ............................................................................. 10 17 DECLARATION OF CONFORMITY .............................................. 11 Copyright © 2014 VARO P a g e |2 www.varo.
PAGE 3
EN POWX0682 DUAL SAW 1500W POWX0682 1 APPLIANCE This item is designed to saw all material without changing the saw blades. It makes smoother, cleaner cuts with less vibration and kickback then any other single blade saw. It is not designed for commercial use. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions. 2 DESCRIPTION (FIG.A) 1. 2. 3. 4.
PAGE 4
EN POWX0682 Wear noise protection. Wear a mask in dusty conditions. Wear eye protection. Wear gloves. 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool. 5.
PAGE 5
EN POWX0682      Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times.
PAGE 6
EN POWX0682  If the blades come in contact with the work piece before they reach full speed, it could cause the saw to kickback toward you resulting in serious injury. 7 ASSEMBLY 7.1 Attaching the handle  Screw handle into saw (fig 1).  Use nut to tighten the handle. 7.2 Removing the blades Be sure to first unplug the electric cord from the electrical outlet and allow blades to cool before removing the blades.       Push the spindle lock to secure the blade (Fig 2).
PAGE 7
POWX0682 EN If the feed speed is too fast there is a definitive risk that the cut might split. The splinter will get bigger and bigger and eventually break risking serious personal injury. If the feed speed is too high there is risk that the cut might split and the splintering opening’s volume will not be sufficient to divert all shaving. The result is poor cut with significant discharge on the lower side of the material. 8.
PAGE 8
EN POWX0682  Turn the feeder wheel to lubricate the blades. Proper dosage is required. 8.6 Dust extraction Attach a vacuum cleaner to the dust extraction outlet. Ask your vacuum distributor for the correct connection piece if it isn’t included. 9 CLEANING AND MAINTENANCE Attention! Before performing any work on the equipment, pull the power plug. 9.1     Cleaning Keep the ventilation slots of the machine clean to prevent overheating of the engine.
PAGE 9
EN POWX0682 4200 min-1 45mm 160mm 48T Double insulated Continuous operation No – load speed Max. cutting depth Saw blade diameter Teeth Protection class Rated operation 11 NOISE Noise values measured according to relevant standard. (K=3) Acoustic pressure level LpA 98 dB(A) Acoustic power level LwA 109 dB(A) ATTENTION! Wear hearing protection when sound pressure is over 85 dB(A). aw (Vibration) Max. 3.
PAGE 10
POWX0682 EN 15 WARRANTY               This product is warranted for a 36-months period effective from the date of purchase by the first user. This warranty covers all material or production flaws excluding : batteries, chargers, defective parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects resulting from maltreatment, accidents or alterations; nor the cost of transportation.
PAGE 11
EN POWX0682 17 DECLARATION OF CONFORMITY VARO – Vic. Van Rompuy N.V. declares that, product: Twin-disk cutter trade mark: Powerplus model: POWX0682 Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.