Operation Manual

POWX075 EN
Copyright © 2014 VARO P a g e | 1 www.varo.com
1 APPLICATION ................................................................................ 3
2 DESCRIPTION (FIG. A) .................................................................. 3
3 PACKAGE CONTENT LIST ............................................................ 3
4 SYMBOLS ....................................................................................... 4
5 GENERAL POWER TOOL SAFETY WARNINGS ......................... 4
5.1 Work area ............................................................................................................... 4
5.2 Electrical safety ..................................................................................................... 4
5.3 Personal safety ...................................................................................................... 5
5.4 Power tool use and care ........................................................................................ 5
5.5 Service .................................................................................................................... 5
6 ADDITIONAL SAFETY INSTRUCTIONS FOR CUT-OFF
MACHINES ...................................................................................... 5
7 ADDITIONAL SAFETY INSTRUCTIONS FOR LASERS ............... 6
8 ASSEMBLY ..................................................................................... 6
8.1 Mounting the machine (fig. A) ............................................................................... 6
8.2 Adjusting the sawing angle (fig. A&B) ................................................................. 6
8.3 Adjusting the bevel angle (fig. A&C) .................................................................... 6
8.4 Checking and adjusting the saw blade depth (fig. C) .......................................... 7
8.5 Replacing the saw blade (fig. D) ........................................................................... 7
8.6 Setting the mitre angle (tig. A) .............................................................................. 7
8.7 Setting the bevel angle (fig. A) .............................................................................. 7
8.8 Setting the groove depth (fig. E) ........................................................................... 7
8.9 Mounting and adjusting the table extenders (fig. F) ............................................ 8
8.10 Mounting and adjusting the vice (fig. G) .............................................................. 8
8.11 Instructions for use ............................................................................................... 8
9 OPERATION.................................................................................... 8
9.1 Switching on and off (fig. A) ................................................................................. 8
9.2 Sliding cut (fig. A&H) ............................................................................................. 8
9.3 Grooving (tig. I) ...................................................................................................... 8
9.4 Dust extraction (fig. J) ........................................................................................... 9
10 CLEANING AND MAINTENANCE ................................................. 9