Operation Manual

POWX07582 EN
Copyright © 2017 VARO P a g e | 2 www.varo.com
10.1.6 Bevelling ................................................................................................................ 12
10.1.7 Sawing the workpiece: ........................................................................................... 12
10.1.8 Double mitre cut ..................................................................................................... 12
10.1.9 Sawing the workpiece: ........................................................................................... 12
10.2 Table saw mode ................................................................................................... 13
10.2.1 Safety instructions for the upper saw blade guard .................................................. 13
10.2.2 Riving knife ............................................................................................................ 13
10.2.3 Lower saw blade guard .......................................................................................... 13
10.2.4 Push block ............................................................................................................. 13
10.2.5 Installation.............................................................................................................. 13
10.2.6 Sawing ................................................................................................................... 14
11 CLEANING AND MAINTENANCE ................................................ 14
11.1 Cleaning ............................................................................................................... 14
11.2 Maintenance ......................................................................................................... 15
11.2.1 For all maintenance works ..................................................................................... 15
11.2.2 Before every use .................................................................................................... 15
11.2.3 Monthly (if the saw is used every day) .................................................................... 15
11.2.4 Every 300 operating hours (Fig. 3) ......................................................................... 15
11.2.5 Changing the saw blade (Fig. 5) ............................................................................. 16
11.2.6 Replacing the saw guide (21) ................................................................................. 17
11.3 Modifications ........................................................................................................ 17
11.3.1 Modifications on the mitre and width guide (Fig. 7) ................................................. 17
11.3.2 Modifications on the mitre scale indicator (Fig. 8) ................................................... 17
11.3.3 Modification of the bevelling angle indicator (Fig. 9) ............................................... 17
11.3.4 Adapting the sawing depth stop (Fig. 10) ............................................................... 18
11.4 Cleaning ............................................................................................................... 18
11.5 Storage ................................................................................................................. 18
12 TECHNICAL DATA ....................................................................... 18
13 NOISE ............................................................................................ 19
14 WARRANTY .................................................................................. 19
15 ENVIRONMENT ............................................................................ 20
16 DECLARATION OF CONFORMITY ............................................. 20