Technical data

POWX0782 EN
Copyright © 2015 VARO P a g e | 20 www.varo.com
11.3 Modifications
11.3.1 Modifications on the mitre and width guide (Fig. 27)
 Loosen the attachment screws (L1) of the guide.
 Adapt the guide so that it is positioned exactly at right angles to the saw blade, when the
mitre table (11) is in the 0° position.
 Retighten the attachment screws of the guide.
11.3.2 Modifications on the mitre scale indicator (Fig. 28)
After loosening the screw (M2), adapt the position of the indicator (M1) until the value that is
indicated corresponds to the currently preset stop position of the turntable.
NOTE:
The mitre table is preset to stop positions at 0°, 15°, 22.5°, 30°, 45° and 60°.
11.3.3 Modification of the bevelling angle indicator (Fig. 29)
 Lock the support arm (N2) in the 0° position.
 Loosen the left-hand/right-hand screw (N1).
 Adapt the support arm until the saw blade is located precisely at an angle of 90°/45° in
relation to the turntable.
 Retighten the left-hand/right-hand screw (N1).
 After loosening the screw (N4), adapt the position of the indicator (N3) until the value that
is indicated corresponds to the currently preset stop position of the support arm.
11.3.4 Adapting the sawing depth stop (Fig. 30)
The sawing depth stop limits the depth to which the saw extends in the saw blade opening.
The saw depth stop must be adapted, if the saw blade makes contact with the table.
 Loosen the attachment screw (O1) of the saw depth stop.
 Adapt the saw depth stop in such a way that the saw blade extends up to the mitre and
depth guide in the saw blade opening.
 Retighten the attachment screws of the saw depth stop.
 Lower the saw head until it is stopped by the saw depth stop, and check whether the saw
blade can freely rotate in this position.
11.4 Cleaning
Use a brush, a dust cloth or vacuum cleaner, to remove all wood chips and sawdust from:
* The adjustment facilities
* The operating components
* The motor ventilation openings
* The space under the table gap.
11.5 Storage
HAZARD!
 Thoroughly clean the whole machine and its accessories.
 Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
 Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
 Don’t keep it in plastic bags to avoid humidity build-up.