Technical data

ManualsBrandsPowerplus ManualsDo-It-Yourself toolsPOWX093

POWX093 EN

1 APPLICATION .................................................................................. 3

2 DESCRIPTION (FIG A) .................................................................... 3

3 PACKAGE CONTENT LIST ............................................................. 3

4 SYMBOLS ........................................................................................ 4

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4

5.1 Work area ................................................................................................................ 4

5.2 Electrical safety ....................................................................................................... 4

5.3 Personal safety ....................................................................................................... 5

5.4 Power tool use and care ......................................................................................... 5

5.5 Service ..................................................................................................................... 5

6 SPECIFIC SAFETY WARNINGS ..................................................... 5

7 OPERATION ..................................................................................... 6

7.1 Depth Stop ............................................................................................................... 6

7.2 Locking lever for cutting machine body ................................................................ 6

7.3 Dust extraction outlet ............................................................................................. 7

7.4 Assembly of parallel stop ....................................................................................... 7

7.5 Inserting and removing the chuck and cutting heads n ....................................... 8

7.6 Cutter guide sleeve ................................................................................................. 8

7.7 Profile accessories ................................................................................................. 9

7.8 Circle cutting accessories ...................................................................................... 9

7.9 Setting the working depth ...................................................................................... 9

7.10 Fine adjustment ...................................................................................................... 9

7.11 Cutting in serval operations ................................................................................... 9

7.12 Switching on and off ............................................................................................. 10

7.13 Adjustable speed .................................................................................................. 10

7.14 Using the parallel guide ........................................................................................ 10

7.15 Cutting direction ................................................................................................... 10

7.16 Replacing the carbon brushes ............................................................................. 10

8 CLEANING AND MAINTENANCE ................................................. 11

8.1 Cleaning................................................................................................................. 11

9 TECHNICAL DATA ........................................................................ 11

Summary of content (13 pages)

PAGE 1
POWX093 EN 1 APPLICATION .................................................................................. 3 2 DESCRIPTION (FIG A) .................................................................... 3 3 PACKAGE CONTENT LIST ............................................................. 3 4 SYMBOLS ........................................................................................ 4 5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4 5.1 Work area ............................
PAGE 2
10 POWX093 EN NOISE ............................................................................................. 11 11 SERVICE DEPARTMENT .............................................................. 11 12 STORAGE ...................................................................................... 11 13 WARRANTY ................................................................................... 12 14 ENVIRONMENT .............................................................................
PAGE 3
EN POWX093 ROUTER POWX093 1 APPLICATION Milling of holes, slots, edges and tenors (dovetail joints). All other uses are expressly excluded. It is not designed for commercial use. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions. 2 DESCRIPTION (FIG A) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Motor housing.
PAGE 4
EN POWX093 4 SYMBOLS In this manual and/or on the machine the following symbols are used: Denotes risk of personal injury or damage to the tool. Wear ear guards and goggles Read manual before use Wear a mask In dusty conditions In accordance with essential requirements of the European directive(s) "Class II - The machine is double insulated; Earthing wire is therefore not necessary 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and all instructions.
PAGE 5
EN POWX093 5.3 Personal safety  Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.  Use safety equipment. Always wear eye protection.
PAGE 6
POWX093             EN Ensure that milling cutter is firmly clamped. Use only milling cutters for routers; never use e.g. milling cutters for drilling machines or stationary machines. Use only commercially available milling cutters for routers with a shank diameter 6 mm or 8 mm. Always use both hands to guide the tool. Never wedge the ON switch fast. Never reach into the milling zone while the tool is running. Feed only running milling cutters to the material.
PAGE 7
POWX093 7.3 EN Dust extraction outlet You are advised to use the dust extraction outlet. You can purchase a suitable commercial vacuum cleaner or extract the dust via an extractor tube while the cutting machine is in operation. The outlet must project out of the rear of the machine (5). Two bolts and nuts are supplied to attach it. Hold the extractor outlet in position and lay the cutting machine on its side.
PAGE 8
POWX093 EN 7.5 Inserting and removing the chuck and cutting heads n The cutting machine is supplied with a set of 12 mm cutting heads. There are a number of heads for cutting various profiles in wood. One example is a decorative edge on a skirting board. The machine is supplied with two chucks for 8 mm and 12 mm. Numerous cutting heads are available for different profiles. Some heads are too large and leave no space for the dustextraction system. In this casep a mask should be worn.
PAGE 9
POWX093 7.7 EN Profile accessories The accessories can be used for work on profiled workpieces such as the head of a bed and if you wish to repeat the outside profile further towards the inside. Take the parallel guide. Loosen and remove the four cros>head screws attaching the plastic guides (16). Remove the plastic guides and keep them in a safe place for further use. Locate the profile accessories and position this casting (17). Secure it with two cross-head screws.
PAGE 10
POWX093 EN 7.12 Switching on and off Grasp the machine securely at the handles. When it is pointing in your direction, the start-stop button is located on the right handle (24}. Keeping the safety lock pressed, press the startstop button. You do not have to keep the safety lock pressed as it remains in position automatically until you release the startstop button again. To stop the machine, simply release the startstop button and the motor stops.. 7.
PAGE 11
EN POWX093 8 CLEANING AND MAINTENANCE Attention !Before performing any work on the equipment, pull the power plug. 8.1     Cleaning Keep the ventilation slots of the machine clean to prevent overheating of the engine. Regularly clean the machine housing with a soft cloth, preferably after each use. Keep the ventilation slots free from dust and dirt. If the dirt does not come off use a soft cloth moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water, etc.
PAGE 12
POWX093 EN 13 WARRANTY               This product is warranted for a 36-month period effective from the date of purchase by the first user. This warranty covers all material or production flaws excluding : batteries, chargers, defective parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects resulting from maltreatment, accidents or alterations; nor the cost of transportation.
PAGE 13
EN POWX093 15 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, product : Router trade mark : POWERplus model : POWX093 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.