Operation Manual

ManualsBrandsPowerplus ManualsDo-It-Yourself toolsPOWX1160

POWX1160 EN

1 APPLICATION .................................................................................. 2

2 DESCRIPTION(FIG.1) ...................................................................... 2

3 PACKAGE CONTENT LIST ............................................................. 2

4 SYMBOLS ........................................................................................ 3

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 3

5.1 Work area ................................................................................................................ 3

5.2 Electrical safety ....................................................................................................... 3

5.3 Personal safety ....................................................................................................... 3

5.4 Power tool use and care ......................................................................................... 4

5.5 Service ..................................................................................................................... 4

6 ADDITIONAL SAFETY INSTRUCTIONS FOR HAMMER DRILLS 4

7 BEFORE USING THE TOOL FOR THE FIRST TIME ..................... 5

7.1 Fitting and changing tools (Fig. 2) ......................................................................... 5

7.2 Removing SDS-plus tool ........................................................................................ 5

8 OPERATION ..................................................................................... 6

8.1 Switching ON/OFF ................................................................................................... 6

8.2 Handle attachment (Fig. 3)...................................................................................... 6

8.3 Depth stop (Fig. 4) ................................................................................................... 6

8.4 Dust collection device (Fig. 5) ................................................................................ 6

8.5 Hammer / drill switch .............................................................................................. 6

9 CLEANING AND MAINTENANCE ................................................... 7

9.1 Cleaning................................................................................................................... 7

9.2 Replacing Coal Brushes ......................................................................................... 7

10 TECHNICAL DATA .......................................................................... 7

11 NOISE ............................................................................................... 7

12 SERVICE DEPARTMENT ................................................................ 8

13 STORAGE ........................................................................................ 8

14 WARRANTY ..................................................................................... 8

15 ENVIRONMENT ............................................................................... 9

16 DECLARATION OF CONFORMITY ................................................ 9

Summary of content (9 pages)

PAGE 1
POWX1160 EN 1 APPLICATION .................................................................................. 2 2 DESCRIPTION(FIG.1) ...................................................................... 2 3 PACKAGE CONTENT LIST ............................................................. 2 4 SYMBOLS ........................................................................................ 3 5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 3 5.1 Work area ..........................
PAGE 2
EN POWX1160 HAMMER DRILL 1500W POWX1160 1 APPLICATION The machine is intended for hammer drilling in concrete, brick and stone, as well as for light chiseling work. It is also suitable for drilling without impact in wood, metal, ceramic and plastic. It is not designed for commercial use. Warning! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions. 2 DESCRIPTION(FIG.1) 1. 2.
PAGE 3
EN POWX1160 4 SYMBOLS In this manual and/or on the machine the following symbols are used: Read manual before use In accordance with essential requirements of the European directive(s) Class II - The machine is double insulated; Earthing wire is therefore not necessary. Always wear safety goggles Wear gloves 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury.
PAGE 4
EN POWX1160       Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used whenever conditions require will reduce personal injuries. Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. Remove any adjusting key or wrench before turning the power tool on.
PAGE 5
POWX1160                    EN Wear goggles and use a dust mask on jobs generating dust. Do not use in areas where there are vapours or flammable liquids. Always pull the plug out of the socket before cleaning or making changes to the machine. Protect the power cable from damage. Oil and acid can damage the cable. Never overload the machine. Secure all workpieces sufficiently.
PAGE 6
POWX1160 EN 8 OPERATION 8.1 Switching ON/OFF  Switching on: Press the operating switch (8).  Switching off: Release the operating switch(8) 8.2 Handle attachment (Fig. 3) For reasons of safety, only use the hammer drill with handle attachment. You will be able to obtain a safe body position when working by rotating the handle attachment. Loosen and turn the handle attachment in an ant-clockwise direction. Then tighten the handle attachment. 8.3 Depth stop (Fig.
PAGE 7
EN POWX1160 Important! When hammer drilling you will require a low pressure. Too much pressure will place unnecessary load on the motor. Check the drill bits regularly. Re-sharpen or replace blunt drill bits. Always wait until the machine has come to a complete standstill before changing the drilling, hammer/drilling function. 9 CLEANING AND MAINTENANCE Attention !Before performing any work on the equipment, pull the power plug. 9.
PAGE 8
EN POWX1160 12 SERVICE DEPARTMENT   Damaged switches must be replaced by our after-sales service department. If the connecting cable (or mains plug) is damaged, it must be replaced by a particular connecting cable which is available from our service department. Replacement of the connecting cable must only be carried out by our service department (see last page) or by a qualified person (qualified electrician). 13 STORAGE     Thoroughly clean the whole machine and its accessories.
PAGE 9
EN POWX1160 15 ENVIRONMENT Should your appliance need replacement after extended use, do not discard it with the household rubbish but dispose of it in an environmentally safe way. Waste produced by electrical machine items should not be handled like normal household rubbish. Please recycle where recycle facilities exist. Check with your Local Authority or retailer for recycling advice. 16 DECLARATION OF CONFORMITY VARO N.V.