Operation Manual

POWX1170 EN
Copyright © 2016 VARO P a g e | 2 www.varo.com
HAMMER DRILL 750W
POWX1170
1 APLICATION
The power tool is intended for driving and drilling through wood, metal, plastics and masonry.
It is not designed for commercial use.
WARNING Please read and understand this operating manual before use
and keep it for your future reference.
2 DESCRIPTION (FIG. A)
1. Depth stop
2. SDS Chuck
3. Auxiliary handle
4. Mode selector
5. Lock knob for depth stop
6. Soft grip
7. Forward/reverse lever
8. On/off trigger
9. Lock on button
10. Dust cover
11. Speed regulator
3 PACKAGE CONTENT LIST
 Remove all packing materials
 Remove remaining packaging and transit supports (if existing)
 Check the completeness of the packing content
 Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
 Keep the packaging materials as long as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
1 hammer drill
1 manual
3 SDS drill (8/10/12 x 150mm)
2 chisel (14 x 250mm, 1 point, 1 flat)
1 13mm chuck and adapter
1 dust cover
1 depth gauge
When parts are missing or damaged, please contact your dealer.
4 EXPLANATION OF SYMBOLS
In this manual and/or on the machine the following symbols are used:
In accordance with essential
requirements of the European
directive(s)
Read instructions carefully
"Class II - The machine is
double insulated; Earthing wire
is therefore not necessary
Wear safety glasses and ear
protection
Denotes risk of personal injury
or damage to the tool.
Wear gloves