Operation Manual

POWX1172 EN
Copyright © 2016 VARO NV P a g e | 7 www.varo.com
Do not use the chuck with SDS connector in combination with the
hammer/hammer drill function!
9 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull the power
plug.
9.1 Cleaning
 Keep the ventilation slots of the machine clean to prevent overheating of the engine.
 Regularly clean the machine housing with a soft cloth, preferably after each use.
 Keep the ventilation slots free from dust and dirt.
 If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10 TECHNICAL DATA
Rated Voltage
220-240 V
Rated Frequency
50 Hz
Rated Power
1250 W
Rotation speed
800 min
-1
Protection class
II
Drill capacity concrete
30 mm
Drill capacity steel
13 mm
Drill capacity wood
40 mm
Impact rate
3900 min
-1
Cable length
3 m + VDE plug
Chuck type
13mm chuck and adapter
11 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
92 dB(A)
Acoustic power level LwA
103 dB(A)
ATTENTION! Wear hearing protection when sound pressure is
over 85 dB(A).
aw (Vibration)
14,6 m/s²
K = 1,5 m/s²