Operation Manual

POWX1186 EN
Copyright © 2016 VARO P a g e | 9 www.varo.com
11 TECHNICAL DATA
Rated voltage – rated frequency
230-240V~ 50Hz
Rated Power
1600W
Protection class
class II
Cable length
5m
Chuck type
SDS Hex
Impact Rate
2000 beats/min
12 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
99 dB(A)
Acoustic power level LwA
105 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration):
19.2 m/s²
K = 1.5 m/s²
13 SERVICE DEPARTMENT
 Damaged switches must be replaced by our after-sales service department.
 If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).
14 STORAGE
 Thoroughly clean the whole machine and its accessories.
 Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
 Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
 Don’t keep it in plastic bags to avoid humidity build-up.