Operation Manual

ManualsBrandsPowerplus ManualsGrindingPOWX1250

POWX01250 EN

1 APPLICATION 2

2 DESCRIPTION (FIG A) 2

3 PACKAGE CONTENT LIST 2

4 SYMBOLS 3

5 GENERAL POWER TOOL SAFETY WARNINGS 3

5.1 Working area 3

5.2 Electrical safety 3

5.3 Personal safety 4

5.4 Power tool use and care 4

5.5 Service 4

6 ADDITIONAL SAFETY INSTRUCTIONS FOR BENCH GRINDERS

7 OPERATION 5

7.1 Assembly instructions 5

7.2 Work rest adjustment 5

7.3 Operating 5

7.4 Changing grinding wheels 5

8 OPERATION AND TROUBLESHOOTING 6

8.1 Troubleshooting 6

8.1.1 Grinder will not start 6

8.1.2 Wheel wobbles or vibrates 6

8.1.3 Wheel leaves rough finish. 6

8.2 Handy hints 6

9 TECHNICAL DATA 7

10 NOISE 7

11 WARRANTY 7

12 ENVIRONMENT 8

13 DECLARATION OF CONFORMITY 8

Summary of content (8 pages)

PAGE 1
POWX01250 EN 1 APPLICATION 2 2 DESCRIPTION (FIG A) 2 3 PACKAGE CONTENT LIST 2 4 SYMBOLS 3 5 GENERAL POWER TOOL SAFETY WARNINGS 3 5.1 Working area 3 5.2 Electrical safety 3 5.3 Personal safety 4 5.4 Power tool use and care 4 5.5 Service 4 6 ADDITIONAL SAFETY INSTRUCTIONS FOR BENCH GRINDERS 4 7 OPERATION 5 7.1 Assembly instructions 5 7.2 Work rest adjustment 5 7.3 Operating 5 7.4 Changing grinding wheels 5 8 OPERATION AND TROUBLESHOOTING 6 8.
PAGE 2
EN POWX01250 BENCH GRINDER POWX1250 1 APPLICATION This dry grinder is a combination tool tor coarse and fine grinding. The tool was developed mainly for the machining and sharpening of knives, scissors, shears, chisels, etc. and tools with cutting edges. Alt other applications are expressly excluded. Attention! Only grinding discs must be used which have been tested to DSA standards and WHICH carry information about the maker, kind of bond, dimensions and permissible rotary speed.
PAGE 3
POWX01250 EN 4 SYMBOLS The following symbols are used in this manual and/or on the machine: In accordance with essential safety standards of applicable European directives Read manual before use Denotes risk of personal injury or damage to the tool. Wear eye protection Wear gloves 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions. Failure to heed warnings and follow instructions may result in electric shock, fire and/or serious injury.
PAGE 4
EN POWX01250 5.3 Personal safety  Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or medication. A moment of inattention when operating a power tool may result in serious personal injury.  Use safety equipment. Always wear eye protection.
PAGE 5
POWX01250 EN  The supply cable is intended for normal conditions of use. It is designed to resist normal mechanical stresses. Do not make loops in the cable or put objects which might damage it on top of it. Also make sure that the cable does not come into contact with any liquid or any source of heat and that it is not used in a damp environment. Do not withdraw the plug from the socket by pulling on the cable.
PAGE 6
EN POWX01250 8 OPERATION AND TROUBLESHOOTING NOTE:  The nut on the right side of the grinder has a standard right hand thread (turn counterclockwise to loosen). The one on the left side has a left hand thread (turn clockwise to loosen). Replace in same order, making sure both domed washers face correct direction, check the paper washer(c and e), if damaged replace with new paper washer. Hold the wheel and tighten the nut firmly but do not over-tighten.
PAGE 7
EN POWX01250 9 TECHNICAL DATA Mains voltage Mains frequency Power input Speed Dry grinding wheel Wet grinding wheel Work light Weight 230V 50Hz 350W 2950min-1 Ø 150mm Ø 200mm 3V, 3W 11kg 10 NOISE Noise emission values measured according to relevant standard. (K=3) Acoustic pressure level LpA 73 dB(A) Acoustic power level LwA 86 dB(A) ATTENTION! The sound power level may exceed 85 dB(A), in this case individual hearing protection shall be worn.
PAGE 8
EN POWX01250  Your appliance must be returned undismantled to your dealer in an acceptably clean state, (in its original blow-moulded case if applicable to the unit), accompanied by proof of purchase. 12 ENVIRONMENT Should your appliance need replacement after extended use, do not dispose of it with the household refuse, but in an environmentally safe way. Please dispose of used motor oil in a manner that protects the environment.