Operation Manual

ManualsBrandsPowerplus ManualsToolPOWX1310

POWX1310 EN

1 APPLICATION .................................................................................. 3

2 DESCRIPTION (FIG A) .................................................................... 3

3 PACKAGE CONTENT LIST ............................................................. 3

4 SYMBOLS ........................................................................................ 3

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4

5.1 Work area ................................................................................................................ 4

5.2 Electrical safety ....................................................................................................... 4

5.3 Personal safety ....................................................................................................... 4

5.4 Power tool use and care ......................................................................................... 5

5.5 Service ..................................................................................................................... 5

6 SPECIFIC SAFETY WARNINGS ..................................................... 5

7 ADJUSTMENTS ............................................................................... 6

7.1 Adjusting the cutting depth .................................................................................... 6

7.2 Adjusting the cutting angle .................................................................................... 6

7.3 Adjusting the height ............................................................................................... 6

7.4 Checking the cutting depth .................................................................................... 6

7.5 Setting the cutting depth ........................................................................................ 6

8 ASSEMBLY ...................................................................................... 6

8.1 Mounting saw blade ................................................................................................ 6

8.2 Mounting dust bag .................................................................................................. 7

8.3 Attaching the plate protection ................................................................................ 7

9 OPERATION ..................................................................................... 7

9.1 Switching on and off. .............................................................................................. 7

9.2 Marking the workpieces. ......................................................................................... 7

9.3 Positioning of the machine..................................................................................... 7

9.4 Large workpieces: ................................................................................................... 7

9.5 Small workpieces. ................................................................................................... 7

9.6 Sawing grooves ...................................................................................................... 7

9.7 Joining the workpieces ........................................................................................... 8

10 CLEANING AND MAINTENANCE ................................................... 8

10.1 Cleaning................................................................................................................... 8

Summary of content (10 pages)

PAGE 1
POWX1310 EN 1 APPLICATION .................................................................................. 3 2 DESCRIPTION (FIG A) .................................................................... 3 3 PACKAGE CONTENT LIST ............................................................. 3 4 SYMBOLS ........................................................................................ 3 5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4 5.1 Work area ...........................
PAGE 2
11 POWX1310 EN TECHNICAL DATA .......................................................................... 8 12 NOISE ............................................................................................... 8 13 SERVICE DEPARTMENT ................................................................ 8 14 STORAGE ........................................................................................ 9 15 WARRANTY .....................................................................................
PAGE 3
EN POWX1310 BISCUIT JOINTER 900W POWX1310 1 APPLICATION The biscuit jointer is suitable for culling grooves for biscuit dowel joints in solid wood, plywood, chipboard, fiberboard, Plexiglas and artificial marble. It is not designed for commercial use. WARNING! Please read and understand this operating manual before use and keep it for your future reference. Your power tool should only be passed on with these instructions. 2 DESCRIPTION (FIG A) 1. 2. 3. 4. 5. 6. 7. 8. 9.
PAGE 4
EN POWX1310 Class II - The machine is double insulated; Earthing wire is therefore not necessary. 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool. 5.
PAGE 5
EN POWX1310    Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
PAGE 6
POWX1310     EN Always wear safety goggles and hearing protection. If desired or required also use another protection for example an apron or helmet Always disconnect the plug from the socket before carrying out any work on the machine, only plug in when the machine is switched off Keep mains lead clear from working range of the machine. Always lead the cable away behind you. The base plate must not be clamped down while the blade is extended.
PAGE 7
EN POWX1310       Remove the flange nut from the spindle using the wrench. Position the saw blade and the flange. Place the flange nut from the spindle and tighten it with the wrench. Take care that the flange nut will be placed with the correct aide on the spindle. Release the spindle lock and check that the spindle is unlocked by rotating it. Close the top of the base plate and fasten four screws. Make sure that the top of the base plate is securely closed before operating the machine. 8.
PAGE 8
EN POWX1310  Move the motor base backward and switch the machine off. 9.7 Joining the workpieces When the grooves in both work pieces have been made the workplaces can be joined together  Put glue in both grooves.  Race the biscuit dowel in the groove of one work piece.  Place the other work piece on the biscuit dowel.  Fasten the work pieces and wait till the glue is dry. 10 CLEANING AND MAINTENANCE Attention !Before performing any work on the equipment, pull the power plug. 10.
PAGE 9
EN POWX1310 connecting cable must only be carried out by our service department (see last page) or by a qualified person (qualified electrician). 14 STORAGE     Thoroughly clean the whole machine and its accessories. Store it out of the reach of children, in a stable and secure position, in a cool and dry place, avoid too high and too low temperatures. Protect it from exposure to direct sunlight. Keep it in the dark, if possible. Don’t keep it in plastic bags to avoid humidity build-up.
PAGE 10
EN POWX1310 17 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, Product: Biscuit Jointer Trade mark: POWERplus Model: POWX1310 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.