Operation Manual

POWX1331LI EN
Copyright © 2017 VARO P a g e | 9 www.varo.com
9.4 Application tips
9.4.1 Selecting the Application Tool/Accessory
Accessory (Fig 5)
Material
A: 3.0 cm saw blade
Wooden materials, plastic, metal,
gypsum and other soft materials.
B: 3.2 cm saw blade
Wooden materials, plastic, metal,
gypsum and other soft materials.
C: 2.0 cm saw blade
Wooden materials, plastic, metal,
gypsum and other soft materials.
D: 1.0 cm small saw blade
Wooden materials, plastic, metal,
gypsum and other soft materials.
E: 9.0 cm segment blade
Wooden materials, plastic, metal,
gypsum and other soft materials.
F: 3.0 cm scraping blade
Suitable for the removal of paint
and carpet.
G: 9.0 cm carbide segment blade
Cuts grooves in drywall, plaster,
lightweight concrete and similar
materials
H: Triangular sanding pad
Sanding pad for 90x90x90 sized
sanding papers.
I: Triangular sanding papers
Sanding papers in different
grains:
• 120
• 180
• 240
J: Finger sanding pad
Sanding pad for finger sanding
papers.
K: Finger sanding papers
Finger sanding papers in different
grains:
• 120
• 180
• 240
9.4.2 Sawing
Use undamaged faultless saw blades only. Deformed, blunt saw blades or
saw blades that are otherwise damaged can break.
Plunge cuts may only be applied to soft materials, such as wood, gypsum
plaster boards, etc.!
Before sawing with saw blades in wood, particle board, building materials, etc., check these
for foreign objects such as nails, screws, or similar. If required, remove foreign objects or use
saw blades for metal.