Operation Manual

ManualsBrandsPowerplus ManualsOtherPOWX1335LI

POWX1335LI EN

1 APPLICATION ................................................................................ 3

2 DESCRIPTION (FIG. 1) ................................................................... 3

3 PACKAGE CONTENT LIST ............................................................ 3

4 SYMBOLS ....................................................................................... 3

5 GENERAL SAFETY WARNINGS AND INSTRUCTIONS .............. 4

5.1 Working area .......................................................................................................... 4

5.2 Electrical safety ..................................................................................................... 4

5.3 Personal safety ...................................................................................................... 4

5.4 Power tool use and care ........................................................................................ 5

5.5 Service .................................................................................................................... 5

6 MACHINE-SPECIFIC SAFETY WARNINGS .................................. 5

7 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND

CHARGERS .................................................................................... 6

7.1 Batteries (6) ............................................................................................................ 6

7.2 Chargers (5) ........................................................................................................... 6

8 ASSEMBLY ..................................................................................... 7

8.1 Battery charging .................................................................................................... 7

8.2 Charging indication ............................................................................................... 7

8.3 To install or remove the battery pack ................................................................... 7

8.3.1 To remove the battery .............................................................................................. 7

8.3.2 To install the battery ................................................................................................ 7

8.4 Changing the accessory ....................................................................................... 7

8.4.1 Selecting the Application Tool/Accessory ................................................................. 7

8.4.2 Mounting/Replacing the Application Tool/ Accessory ............................................... 8

8.4.3 Mounting/Replacing a Sanding Sheet on the Sanding Plate ..................................... 8

9 OPERATION.................................................................................... 8

9.1 Switching ON/OFF ................................................................................................. 8

9.2 Adjusting the frequency ........................................................................................ 8

9.3 Working Advice...................................................................................................... 8

9.3.1 Sawing..................................................................................................................... 9

9.3.2 Separating ............................................................................................................... 9

Summary of content (12 pages)

PAGE 1
POWX1335LI EN 1 APPLICATION ................................................................................ 3 2 DESCRIPTION (FIG. 1) ................................................................... 3 3 PACKAGE CONTENT LIST............................................................ 3 4 SYMBOLS ....................................................................................... 3 5 GENERAL SAFETY WARNINGS AND INSTRUCTIONS .............. 4 5.1 Working area .................................
PAGE 2
POWX1335LI EN 9.3.3 Sanding ................................................................................................................... 9 9.3.4 Scraping .................................................................................................................. 9 10 MAINTENANCE .............................................................................. 9 10.1 General ...................................................................................................................
PAGE 3
EN POWX1335LI LI-ION MULTI-USE TOOL 10.8V POWX1335LI 1 APPLICATION Depending on which accessory mounted this power tool is intended for dry sanding small areas and for sawing, scraping polishing, rasping, cutting and separating. WARNING! For your own safety, read this manual and the general safety instructions carefully before using the appliance. Your power tool should only be given to other users together with these instructions. 2 1. 2. 3. 4. 5. 6. 3      DESCRIPTION (FIG.
PAGE 4
EN POWX1335LI In accordance with essential requirements of the European directive(s) Wear a mask In dusty conditions Class II - The machine is double insulated; Earthing wire is therefore not necessary. 5 GENERAL SAFETY WARNINGS AND INSTRUCTIONS Read all safety warnings and instructions. Failure to heed warnings and follow instructions may result in electric shock, fire and/or serious injury. Keep safety warnings and instructions for future reference.
PAGE 5
POWX1335LI      EN Avoid accidental starts. Ensure the switch is in the off position before inserting the plug. Carrying power tools with your finger on the switch or plugging in power tools when the switch is in the on position makes accidents more likely. Remove any adjusting keys or spanners before turning on the power tool. A spanner or key left attached to a rotating part of the power tool may result in personal injury. Do not reach out too far. Keep your feet firmly on the ground at all times.
PAGE 6
EN POWX1335LI           7 7.1         Avoid unintentional switching on. Ensure the On/Off switch is in the off position before inserting battery pack. Carrying the power tool with your finger on the On/Off switch or inserting the battery pack into power tools that have the switch on invites accidents. Do not open the battery. Danger of short-circuiting. Protect the battery against heat, e.g., also against continuous sun irradiation and fire. There is danger of explosion.
PAGE 7
EN POWX1335LI       Never attempt to charge non-rechargeable batteries. Have defective cords replaced immediately. Do not expose to water. Do not open the charger. Do not probe the charger. The charger is intended for indoor use only. 8 ASSEMBLY 8.1 Battery charging Use only the battery charger supplied with your tool. Only these battery chargers are matched to the lithium ion battery of your power tool. Note: The battery is supplied partially charged.
PAGE 8
POWX1335LI Plunge saw blade (10) Segment saw blade(12) Stainless steel scraper (11) Sanding plate (8) 8.4.2      EN Wooden materials, plastic, gypsum and other soft materials. Wooden materials, plastic, nonferrous metals. Wood, paint, carpet adhesive, silicone and other elastic materials. Depends on sanding sheet (9) Mounting/Replacing the Application Tool/ Accessory If required, remove an already mounted application tool/accessory.
PAGE 9
POWX1335LI 9.3.1 EN Sawing Use undamaged faultless saw blades only. Deformed, blunt saw blades or saw blades that are otherwise damaged can break. Plunge cuts may only be applied to soft materials, such as wood, gypsum plaster boards, etc.! Before sawing with saw blades in wood, particle board, building materials, etc., check these for foreign objects such as nails, screws, or similar. If required, remove foreign objects or use saw blades for metal. 9.3.
PAGE 10
EN POWX1335LI WARNING: Do not allow brake fluids, gasoline, petroleum-based products, penetrating oils, etc. come in contact with plastic parts, they contain chemicals that can damage, weaken or destroy plastic. WARNING: Always wear safety goggles or safety glasses with side shields when using compressed air to clean tools. If the operation is dusty, also wear a dust mask. BATTERIES: The battery pack for this tool is equipped with a Li-ion rechargeable battery.
PAGE 11
POWX1335LI             15 EN We also disclaim all liability for any bodily injury resulting from inappropriate use of the tool. Repairs may only be carried out by an authorized customer service centre for Powerplus tools. You can always obtain more information at the number 00 32 3 292 92 90. Any transportation costs shall always be borne by the customer, unless agreed otherwise in writing.
PAGE 12
EN POWX1335LI 16 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, Product: Cordlessmulti-use tool trade mark: POWERplus model : POWX1335LI is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.