Operation Manual

ManualsBrandsPowerplus ManualsOtherPOWX1340

POWX1340 EN

1 APPLICATION .................................................................................. 3

2 DESCRIPTION (FIG A) .................................................................... 3

3 PACKAGE CONTENT LIST ............................................................. 3

4 SYMBOLS ........................................................................................ 3

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4

5.1 Work area ............................................................................................................... 4

5.2 Electrical safety ...................................................................................................... 4

5.3 Personal safety ...................................................................................................... 4

5.4 Power tool use and care ........................................................................................ 5

5.5 Service .................................................................................................................... 5

6 SPECIFIC SAFETY WARNINGS ..................................................... 5

6.1 Additional safety instructions ............................................................................... 6

7 ASSEMBLY ...................................................................................... 6

7.1 Changing the attachment tools (Pic 1) ................................................................. 6

7.2 Attaching small tools directly to the multi tool. (Pic 2) ...................................... 6

7.3 Accessories ............................................................................................................ 7

7.3.1 Grinding bits .............................................................................................................. 7

7.3.2 Grinding points .......................................................................................................... 7

7.3.3 Sander ...................................................................................................................... 7

7.3.4 Grinding stone........................................................................................................... 7

7.3.5 Polishing discs .......................................................................................................... 7

7.3.6 Cutting disc ............................................................................................................... 8

7.3.7 Orbital sander ........................................................................................................... 8

8 CHAINSAW SHARPENING ATTACHMENT KIT (FIG. B) .............. 8

8.1 Assembly of chainsaw sharpening attachment ................................................... 8

8.2 Sharpening the chain ............................................................................................. 9

9 OPERATION ..................................................................................... 9

9.1 On / off switch (Pic. 3) ............................................................................................ 9

9.2 Setting the speed (Pic. 4) ....................................................................................... 9

9.3 LED light (Pic. 5) .................................................................................................... 9

Summary of content (12 pages)

PAGE 1
POWX1340 EN 1 APPLICATION .................................................................................. 3 2 DESCRIPTION (FIG A) .................................................................... 3 3 PACKAGE CONTENT LIST ............................................................. 3 4 SYMBOLS ........................................................................................ 3 5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4 5.1 Work area ...........................
PAGE 2
10 POWX1340 EN CLEANING AND MAINTENANCE................................................. 10 10.1 Cleaning................................................................................................................ 10 11 TECHNICAL DATA ........................................................................ 10 12 NOISE ............................................................................................. 10 13 SERVICE DEPARTMENT ............................................................
PAGE 3
EN POWX1340 MULTI TOOL 180W POWX1340 1 APPLICATION Your multi tool has been designed for drilling, routing, engraving, polishing, cutting, grinding and sanding of wood, metal, plastics and stone. It is not designed for commercial use. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions. 2 DESCRIPTION (FIG A) 1. 2. 3. 4. 5. 6. 7.
PAGE 4
EN POWX1340 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool. 5.1 Work area  Keep work area clean and well lit. Cluttered and dark areas invite accidents.
PAGE 5
EN POWX1340  If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust related hazards. 5.4 Power tool use and care  Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.  Do not use the power tool if the switch does not turn it on and off.
PAGE 6
EN POWX1340         6.1 Make sure that the workpiece is sufficiently supported or clamped. Keep your hands away from the surface to be cut. Always wear safety goggles and hearing protection. If desired or required also use another kind of protection like for example an apron or helmet. Ensure that mounted wheels and points are fitted in accordance with the manufacturer’s instructions. Ensure that blotters are used when they are provided with the bonded abrasive product and when they are required.
PAGE 7
EN POWX1340 - Change the attachment tool. Always tighten attachment tools as much as possible. Shafts which extend out from the collet will cause wobbling. - Tighten the collet chuck grip. To replace the collet chuck, remove the collet chuck grip and replace the chuck. 7.3 7.3.1 Accessories Grinding bits   7.3.2 Grinding points   Use: For fine engraving of various materials. Tip: Work on metals at a low speed and process as if it were hardwood.
PAGE 8
EN POWX1340 7.3.6 7.3.7 Cutting disc  Use: Cutting or slitting bolts, screws , sheet metal, thin wood and plastic.  Use: Sanding , smoothing and shaping wood and fiberglass. Orbital sander 8 CHAINSAW SHARPENING ATTACHMENT KIT (FIG. B) 8.1 Assembly of chainsaw sharpening attachment Depending on your particular chain saw, make sure your assemble your new sharpener properly as follows:  Refer to the drawing below for the correct grinding stone.
PAGE 9
EN POWX1340 8.2 Sharpening the chain  Set your saw on a flat, solid surface. For proper sharpening the chain tension should be adjusted (as specified in the chainsaw instruction manual). Sharpening will be best accomplished if done on the flat of the saw bar – somewhere near the middle of the bar.  Position the saw so that you are looking at the side of the chain bar with the motor to your right. Cutter teeth on the far side of the chain are sharpened, from inside to outside as shown in figure 5.
PAGE 10
EN POWX1340 10 CLEANING AND MAINTENANCE Attention !Before performing any work on the equipment, pull the power plug. 10.1 Cleaning  Keep the ventilation slots of the machine clean to prevent overheating of the engine.  Regularly clean the machine housing with a soft cloth, preferably after each use.  Keep the ventilation slots free from dust and dirt.  If the dirt does not come off use a soft cloth moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water, etc.
PAGE 11
POWX1340 EN 15 WARRANTY               This product is warranted for a 36-month period effective from the date of purchase by the first user. This warranty covers all material or production flaws excluding : batteries, chargers, defective parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects resulting from maltreatment, accidents or alterations; nor the cost of transportation.
PAGE 12
EN POWX1340 17 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, product : Multitool trade mark : POWERplus model : POWX1340 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.