Operation Manual

POWX1340 EN
Copyright © 2015 VARO P a g e | 3 www.varo.com
MULTI TOOL 180W
POWX1340
1 APPLICATION
Your multi tool has been designed for drilling, routing, engraving, polishing, cutting, grinding
and sanding of wood, metal, plastics and stone.
It is not designed for commercial use.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG A)
1. Power cord
2. Hook
3. Switch button
4. Access to carbon brush
5. Locking button
6. LED button
7. LED
8. Collet chuck
9. Adjustment button
10. LCD
11. Collet
12. Spanner
13. Flexible drive shaft
3 PACKAGE CONTENT LIST
 Remove all packing materials
 Remove remaining packaging and transit supports (if existing)
 Check the completeness of the packing content
 Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
 Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
1 multi tool + Accessories
1 base
1 telescopic arm
1 Flexible tube
1 table clamp
1 tile drill
1 chainsaw sharpening kit
1 Instruction manual
When parts are missing or damaged, please contact your dealer.
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Denotes risk of personal injury
or damage to the tool.
Read manual before use
In accordance with essential
requirements of the European
directive(s)
"Class II - The machine is double
insulated; Earthing wire is
therefore not necessary