Operation Manual

POWX1346 EN
Copyright © 2019 VARO P a g e | 6 www.varo.com
▪ Switching the power tool OFF: slide ON/OFF switch button backward onto position (O).
8.2 Speed adjusting (Fig. 5)
The tool can be set at 6-speed adjustment positions. The "1" position indicates the lowest and
the "6" position indicates the highest speed, you can adjust different speed by turning the
speed control dial (3) from "1" to "6" position. The operator may have to vary the speed to
optimize working efficiency.
8.3 Application tips
8.3.1 Selecting the Application Tool/Accessory
Accessory
Material
Plunge cut saw blade
wood
Wooden materials, plastic,
gypsum and other soft materials.
Segment saw blade with
recess
Wooden materials, plastic and soft
metals
Shovel blade
Wood, paint, carpet adhesive,
silicone and other elastic
materials.
Triangular sanding pad
Depends on sanding sheet
Finger Sanding Pad
Depends on sanding sheet