User Manual

ManualsBrandsPowerplus ManualsPower sawsPOWX1365MB MINI CIRCULAR SAW 600W 85MM + MITRE GUIDE EN

POWX1365MB EN

1 APPLICATION .................................................................................. 3

2 OVERVIEW COMPONENTS: MINI SIRCULAR SAW (FIG A) ....... 3

3 OVERVIEW COMPONENTS: MITRE BASE (FIG. B) ..................... 3

4 PACKAGE CONTENT LIST ............................................................. 3

5 SYMBOLS ........................................................................................ 4

6 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4

6.1 Work area ................................................................................................................ 4

6.2 Electrical safety ....................................................................................................... 4

6.3 Personal safety ....................................................................................................... 5

6.4 Power tool use and care ......................................................................................... 5

6.5 Service ..................................................................................................................... 6

7 SPECIFIC SAFETY WARNINGS FOR CIRCULAR SAWS............. 6

8 ASSEMBLY ...................................................................................... 6

8.1 Setting the cutting depth (Fig .1) ............................................................................ 6

8.2 Changing a saw blade............................................................................................. 6

9 OPERATION ..................................................................................... 7

9.1 Holding and switching ON/OFF .............................................................................. 7

9.1.1 Switching on the tool: ................................................................................................ 7

9.1.2 Releasing the plunge stop ......................................................................................... 7

9.2 Setting the guide fence ........................................................................................... 7

9.3 Laser line generator ................................................................................................ 7

9.4 Line following .......................................................................................................... 8

9.5 Dust extraction ........................................................................................................ 8

10 CUTTING .......................................................................................... 8

11 CUT-OUTS ....................................................................................... 9

12 CUTTING PARTICULARLY TOUGH OR ABRASIVE MATERIALS

.......................................................................................................... 9

12.1 Sheet metal:............................................................................................................. 9

12.2 Ceramic tiles, slates etc: ........................................................................................ 9

12.3 Plasterboard: ........................................................................................................... 9

Summary of content (14 pages)

PAGE 1
POWX1365MB EN 1 APPLICATION .................................................................................. 3 2 OVERVIEW COMPONENTS: MINI SIRCULAR SAW (FIG A) ....... 3 3 OVERVIEW COMPONENTS: MITRE BASE (FIG. B) ..................... 3 4 PACKAGE CONTENT LIST ............................................................. 3 5 SYMBOLS ........................................................................................ 4 6 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4 6.
PAGE 2
13 POWX1365MB EN MITRE BASE .................................................................................. 10 13.1 Cutting angle adjustment ..................................................................................... 10 13.2 Installing and adjusting the clamp ....................................................................... 10 13.3 Adjusting position of work platform with angle scale (22) ................................. 10 13.4 Cutting with workbench............................
PAGE 3
EN POWX1365MB MINI CIRCULAR SAW 600W + MITRE BASE POWX1365MB 1 APPLICATION This machine is primarily intended for the sawing, longitudinally and transversely, of solid wood, chipboard, plywood, aluminium, tiles and stone held in a fixed position. Please note that the blade pre-installed in the saw as supplied is intended for use with wood only. Any other use or modification to the device shall be considered as improper use and could give rise to considerable dangers. Not suitable for commercial use.
PAGE 4
EN POWX1365MB 1x saw blade with hardened metal teeth (A): suitable for: softwood, hardwood, boards of all type 1x diamond saw blade (D): suitable for: ceramic, tile 1x HSS saw blade (E): suitable for: soft metal, aluminium 1x dust extraction hose (B) 1x inner hexagon wrench (F) 1x guide fence (G) 1x mitre base When parts are missing or damaged, please contact your dealer.
PAGE 5
POWX1365MB    EN Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
PAGE 6
EN POWX1365MB 6.5 Service  Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. 7 SPECIFIC SAFETY WARNINGS FOR CIRCULAR SAWS            Keep hands away from cutting area and blade. Keep your second hand on auxiliary handle or motor housing. Do not reach underneath the workpiece. Adjust the cutting depth to the thickness of the workpiece.
PAGE 7
POWX1365MB EN 9 OPERATION 9.1 Holding and switching ON/OFF WARNING: Before engage the ON/OFF switch, check that the saw blade is properly fitted and runs smoothly, and that the blade clamp screw (8) is well tightened. Connect the plug to the power supply. The LED power-on indicator (14) is illumed until the tool is disconnect from the power mains. 9.1.1 Switching on the tool: Push the lock-off button (6) forward with the forefinger (refer to the direction of arrow ① on Fig.
PAGE 8
POWX1365MB    EN Switch on the laser generator (1) from the laser aperture using the laser generator switch (2). Align the beam with the mark on the work-piece and slowly push the saw forward using both hands, keeping the red light beam on the mark. Switch off the laser beam when completion of the cut. 9.4 Line following A V-shaped pointer and pointer locate at the front and the rear position of the base plate (18) which allow a line to be followed, when cutting. (Refer to Fig. 6) 9.
PAGE 9
EN POWX1365MB 11 CUT-OUTS      Plunge cutting may not be possible in some hard materials. Choose a suitable saw blade for hard materials and change to it. Set the depth of cut (See “Setting the Cutting Depth” section), plug in the mains supply and then place the metal base plate (18) onto the work surface. Ensure that the front indication mark on the base plate aligns with the start line (See “Line Following” section). Switch on the tool and wait for a moment for the blade to run up to speed.
PAGE 10
POWX1365MB  EN Conventional tools such as keyhole saws or knives generally give excellent results, though the plunge saw can be used if a particularly neat, dust free cut is required or if there is a danger of cutting pipes or cables. 13 MITRE BASE 13.1 Cutting angle adjustment NOTE: The angle scale (25) shows mitre angles from 0° to 60° to the left, and 0°to 60° to the right.
PAGE 11
EN POWX1365MB 13.4 Cutting with workbench WARNING: Always cut in a forward direction. Never draw the tool backwards. If you are a novice user, practice by cutting thin wood until proficient.   Set cutting angle of workbench. (See Cutting angle adjustment Section) Place the work-piece onto the workbench and clamp the work-piece with clamp subassembly (20).
PAGE 12
EN POWX1365MB 14.1 Blades  Always use a sharp blade.  If the tool does not cut as well as expected or if it overheats (temperature cut out may trip) the most common cause is a blunt blade.  It is difficult to see or feel if the blade is blunt. When in doubt use a new blade.  Blades are consumable items.  Beware when changing blades as they can become hot during use. Allow the blade some time to cool before replacing it.
PAGE 13
POWX1365MB EN 17 WARRANTY               This product is warranted as provided by law for a 36 -month period effective from the date of purchase by the first user. This warranty covers all material or production flaws excluding : batteries, chargers, defective parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc.
PAGE 14
EN POWX1365MB 19 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, Product: Mini circular saw 600W Trade mark: POWERplus Model: POWX1365MB is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.