Operation Manual

POWX1365MB EN
Copyright © 2015 VARO P a g e | 12 www.varo.com
14.1 Blades
 Always use a sharp blade.
 If the tool does not cut as well as expected or if it overheats (temperature cut out may trip)
the most common cause is a blunt blade.
 It is difficult to see or feel if the blade is blunt. When in doubt use a new blade.
 Blades are consumable items.
 Beware when changing blades as they can become hot during use. Allow the blade some
time to cool before replacing it.
15 TECHNICAL DATA
Rated voltage
220-240 V
Rated frequency
50 Hz
Rated power
600 W
Rotation speed
5500 min
-1
Blade size
Ø 89 mm
Max. cutting depth soft wood
26.5 mm
Max. cutting depth tile
8 mm
Max. cutting depth aluminum
3 mm
16 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
86 dB(A)
Acoustic power level LwA
97 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration):
2.8 m/s²
K = 1.5 m/s²