User Manual

ManualsBrandsPowerplus ManualsEquipmentPOWX204 PLANER 1500W 204MM EN

POWX204 EN

1 APPLICATION .................................................................................. 3

2 DESCRIPTION (FIG A) .................................................................... 3

3 PACKAGE CONTENT LIST ............................................................. 3

4 SYMBOLS ........................................................................................ 4

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4

5.1 Work area ................................................................................................................ 4

5.2 Electrical safety ....................................................................................................... 4

5.3 Personal safety ....................................................................................................... 5

5.4 Power tool use and care ......................................................................................... 5

5.5 Service ..................................................................................................................... 6

6 SPECIFIC SAFETY WARNINGS ..................................................... 6

6.1 User. ......................................................................................................................... 6

6.2 Blades : .................................................................................................................... 6

6.3 Workpiece : ............................................................................................................. 6

6.4 Machine: .................................................................................................................. 6

6.5 Residual risks .......................................................................................................... 6

7 ASSEMBLY ...................................................................................... 6

7.1 Placement of the appliance .................................................................................... 7

7.2 Installations of the parallel guide – jointer protector (Fig D) ............................... 7

7.3 Installations of lateral guide inclinable to 45° à 90° .............................................. 7

7.4 Installations of the height adjustment grips (Fig F1 & 2): .................................... 7

7.5 Adjustment of cutting depth : ............................................................................... 7

7.6 Replacing and adjusting the cutting edges (FIG H ) : .......................................... 7

7.7 Using the blade adjuster (Fig I) ............................................................................. 8

7.8 Installing chip extractors ........................................................................................ 8

8 BEFORE USING THE TOOL FOR THE FIRST TIME ..................... 9

8.1 Thermal protector (Fig A) ....................................................................................... 9

8.2 Dust collection ........................................................................................................ 9

9 OPERATION ..................................................................................... 9

9.1 Switching on. ........................................................................................................... 9

Summary of content (13 pages)

PAGE 1
POWX204 EN 1 APPLICATION .................................................................................. 3 2 DESCRIPTION (FIG A) .................................................................... 3 3 PACKAGE CONTENT LIST ............................................................. 3 4 SYMBOLS ........................................................................................ 4 5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4 5.1 Work area ............................
PAGE 2
10 POWX204 EN CLEANING AND MAINTENANCE................................................. 10 10.1 Cleaning................................................................................................................. 10 10.2 Lubrication ............................................................................................................ 10 10.3 Replacing the belt : ............................................................................................... 10 10.
PAGE 3
EN POWX204 JOINTER PLANER 204MM POWX204 1 APPLICATION This jointer-planer can be used for all kinds of truing and finishing work in wood, e.g., facing, straightening. thinning, planing and jointing of natural wood up to 204 mm in width. It is not designed for commercial use. Use this tool only for the type of work for which it has been designed. Any use other then those indicated in this manual is a misuse. In the event the user alone is responsible for damages or injuries stemming from such misuse.
PAGE 4
EN POWX204 Pieces packed separately in the box (must be installed and/or utilised during the adjustment and use of the appliance) (FIG C) 1. Parallel guides 2. Blade protector 3. Connector + chip extractor bus for planer mode 4. Lever for adjusting height of appliance 5. Tool for adjusting blades 6. Connector+ chip extractor bus for truing When parts are missing or damaged, please contact your dealer.
PAGE 5
POWX204     EN Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. When operating a power tool outdoors, use an extension cord suitable for outdoor use.
PAGE 6
EN POWX204 5.5 Service  Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. 6 SPECIFIC SAFETY WARNINGS DO NOT let familiarity with this product, gained from repeated use, replace strict adherence to planer safety rules. If you use this tool unsafely or incorrectly, you can suffer serious personal injury.
PAGE 7
EN POWX204 7.1 Placement of the appliance  Before using the appliance, we recommend firmly anchoring its four feet to an underframe.  If the appliance is used as a portable tool, mount it on a stable support so you can work safely without risk.  The mounting surface must first be perforated.  Each foot should be firmly bolted down with sufficiently long bolts (pay attention to the thickness of the work surface) and clamping washers (not provided); place the clamp nuts under the work surface.
PAGE 8
EN POWX204 7. 8. Align laterally so that no element protrudes to the right or left. Once installed you should make sure that the cutters are sitting properly in their sites. To do so, use the blade-adjusting device provided with the appliance. 9. Re-tighten the five screws of the spacer holder 10. To install new cutters: proceed as above but use new cutters. 7.
PAGE 9
EN POWX204 Make sure the contact is correctly aligned (Fig P): If it is not, it will not deactivate the safety system and the appliance will not start. The installation is now completed. You may use the appliance in conformity with the instructions for use. 8 BEFORE USING THE TOOL FOR THE FIRST TIME 8.1 Thermal protector (Fig A)  This machine is equipped with a thermal protector that cuts power in the event of overload. If this occurs, wait several minutes and press the reset button.
PAGE 10
EN POWX204 Adjust as best you can the protective devices and the track according to the workpiece. Warning! Any blade part not in use must be protected! Place the piece to be worked on the in feed table and progressively advance the piece to be worked. Warning! Advancing the piece too quickly generates burrs. 10 CLEANING AND MAINTENANCE Attention !Before performing any work on the equipment, pull the power plug. 10.
PAGE 11
EN POWX204 11 TECHNICAL DATA Voltage / frequency Power input No load speed Cuts / min : blade size : jointer table size : planer table size : Dimensions of parallel guide Incline of parallel guide: feeding speed : max planing width : planing height / depth : Max planing depth : jointer : planer : net weight : 230-240V ~50Hz 1500W 9000 min-1 18000 210 x 16,5 x 1,5mm (2pcs) 740 x 213mm 270 x 204mm 530x105 mm from 0° to 45° 6m/min 204mm 5 - 120mm 0-3mm 0-2mm 26.
PAGE 12
POWX204 EN 15 TROUBLE SHOOTING PROBLEM The machine does not start The machine stops itself The machine does not turn at full power The cuts are not clean The machine is not properly extracting the chips. ACTION 1)Check that it is properly plugged into the outlet. 2) Make sure that the chip extractor is correctly positioned 1) Press the Reset button and wait several minutes (thermal breaker). 2) Check that the chip extraction ports are not obstructed.
PAGE 13
EN POWX204     Devices or parts which are replaced under the warranty therefore remain the property of Varo NV. We reserve the right to reject a claim whenever the purchase cannot be verified or when it is clear that the product has not been properly maintained. (Clean ventilation slots, carbon brushes serviced regularly, etc.). Your purchase receipt must be kept as proof of date of purchase.