User Manual

POWX204 EN
Copyright © 2014 VARO P a g e | 12 www.varo.com
15 TROUBLE SHOOTING
PROBLEM
ACTION
The machine does not start
1)Check that it is properly plugged into the outlet.
2) Make sure that the chip extractor is correctly positioned
The machine stops itself
1) Press the Reset button and wait several minutes (thermal
breaker).
2) Check that the chip extraction ports are not obstructed.
3) Check that the emergency push button is not shoved in
and jammed
The machine does not turn at
full power
1) Decrease the depth of the cut.
2) Check the status of the blades.
3) Check the carbon brushes
4) Check the in feed belt located under the black metal
cover.
The cuts are not clean
1) Check the status of the blades
2) Check the alignment of the blades.
3) Plane the wood with the grain
The machine is not properly
extracting the chips.
1) Check that the extraction ports are not clogged
Attention !
This appliance is delivered with 2 chip extractors. These extractors have slots that deactivate
the cutting safety system. If the extractor (varies depending on whether you are using it in
planing mode or jointing mode) is not in place or is incorrectly placed it will be impossible to
use the appliance.
16 WARRANTY
 This product is warranted for a 36-month period effective from the date of purchase by the
first user.
 This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
 Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
 We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
 Repairs may only be carried out by an authorised customer service centre for Powerplus
tools.
 You can always obtain more information at the number 00 32 3 292 92 90.
 Any transportation costs shall always be borne by the customer, unless agreed otherwise
in writing.
 At the same time, no claim can be made on the warranty if the damage of the device is the
result of negligent maintenance or overload.
 Definitely excluded from the warranty is damage resulting from fluid permeation, excessive
dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate
usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not
following the instructions given in the manual), inexpert assembly, lightning strike,
erroneus net voltage. This list is not exhaustive.
 Acceptance of claims under warranty can never lead to the prolongation of the warranty
period nor commencement of a new warranty period in case of a device replacement.